Datasheet

ManualsBrandsAPEM ManualsInput & Output DevicesContact 1 breaker 250 Vac 1 pc(s)

APEM www.apem.com 1

A01ES-D series

Emergency stop

Distinctive features and specifications

5 prominent red actuator styles

Locked/unlocked status indicator

AC-15 1.5A 250VAC, 6A 250VAC

Panel sealed to IP65

Approved to EN60947-5-5

ELECTRICAL SPECIFICATIONS

• Electrical function:push to shut off, twist to release

• Current/voltage rating:

AC-15 1.5A 250VAC, 6A 250VAC

• Electrical life:6.050 cycles

• Contact gap : >3mm

• Insulation resistance:50MΩ min

• Dielectric test voltage : 2900V

GENERAL SPECIFICATIONS

MATERIALS

ENVIRONMENTAL SPECIFICATIONS

• Sealing:front panel IP65, rear panel IP40

• According to EN 60947-5-5

The company reserves the right to change specifications without notice.

PANEL CUT

OUT Ø16 (.629)

• Panel thickness : 6mm (.236) max.

• Mechanical life : 6050 cycles

• Operating force : 18 to 20N

• Operating temperature : -200C to +550C

• Soldering : 3500C, 5 seconds

(IEC 68-2-2-20Tb, method 2)

• Switch terminals : Solder/ Faston

2.8mm (.110) (IEC 68-2-20)

• Operator Case : Polyetherimide

• Actuator : Polycarbonate

• Switch block : PBT

• Panel Seal : Neoprene

• Switch block approved to :

UL1054 / VDE / EN61058-1

• Torque : 0.8Nm

A01ES-DM

A01ES-DSP3

A01ES-D

A01ES-DF1

A01ES-DF2

A01ESD1601-A

9,25 (0,364)

R 8,00 (0,315)

1,50 (0,059)

0,75 (0,030)

7,25 (0,285)

R 8,00 (0,315)

1,50 (0,059)

0,75 (0,030)

Summary of content (4 pages)

PAGE 1
A01ES-D series Emergency stop Distinctive features and specifications A01ESD1601-A Approved to EN60947-5-5 5 prominent red actuator styles Locked/unlocked status indicator AC-15 1.5A 250VAC, 6A 250VAC Panel sealed to IP65 ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS • Panel thickness : 6mm (.236) max. • Mechanical life : 6050 cycles • Operating force : 18 to 20N • Operating temperature : -200C to +550C • Soldering : 3500C, 5 seconds (IEC 68-2-2-20Tb, method 2) • Switch terminals : Solder/ Faston 2.
PAGE 2
A01ES-D series Emergency stop Overview Operator Switch Block A01 + - SERIES Emergency Stop A01 Switch Block SERIES ES 50B-D Single pole 54B-D Double pole Actuator Options Blank None Customization on request DM Mushroom head (Standard) Knurled head D DF1 Finger grip DF2 Smooth DSP3 Ø40mm head An emergency stop switch assembly requires 1 operator plus 1 switch block Example A01ES-D + A0154B-D Ø16mm.
PAGE 3
A01ES-D series Emergency stop Panel cut-out Ø16 (.
PAGE 4
A01ES-D series Emergency stop Panel cut-out Ø16 (.629) MODEL STRUCTURE + R 4,48 0,176 18,00 0,709 SWITCH BLOCK 15 0,3 14,50 0,571 63,30 2,492 29,80 1,173 PANEL CUT-OUT 0 8,0 1,50 0,059 0,75 0,030 7,25 0,285  40,00 1,575 A01ES-DSP3 + +0.1 -0.0 0,709 +0,004 -0,000 0,50 0,020 15,30 0,603 18,00 14,50 0,571 8,40 [0.330] 14,50 0,571 7,25 0,285 0,50 0,020 15,30 0,603 9,00 0,354 2,80 0,110 18,00 +0.15 -0.0 0,709 +0,006 -0,000 8,40 [0.330] 18,00 DOUBLE POLE - A0154B-D +0.15 -0.