Datasheet

G-22 APEMwww.apem.com
A02 series
Emergency stop switches
Panel cut-out Ø 22 (.866)
G
(.827)
(2.520)
(1.142)
64.00
29.00
21.00
21.00
(.827)
Ø40.00
(
1.575 DIA)
• Prominent 40 mm (1.575) dia. red mushroom actuator
•
Highly reliable positive break switch
• Push to shut off switch, twist to reset to ON
• Approved to UL 1054 / EN 60947-5-5
A
n emergency stop switch assembly requires : operator + switch block.
To order, specify with single pole or double pole positive break switch block.
N.C.
Operator Switch block
❶
❷
General specifications
• Mechanical life : 6.050 cycles (6 cycles per minute)
• Operating force : 20 N
• Operating temperature : -20°C to +85°C
• Degree of environ. protection (IEC529) : IP65 front of panel,
IP40 back of panel
• Switch terminals : M3 screws - wire 2x0.75mm
2
max.
Electrical specifications
• Current/voltage rating :
2,5A 380VAC AC-15
• Contact gap : > 3 mm (.118)
• Dielectric strength : 2.500V
• Electrical life : 6.050 cycles
Accessory
90 mm Ø Self
Adhesive Label
Description Part No
Yellow label with text A02YL1
Yellow label A02YL2
EMERGENCY STOP SWITCH ENCLOSURE
To order the Emergency Stop Switch in the Plastic Enclosure
(94 x 94 x 81 mm) with a 2 pole Positive Break Switch Block and Emergency
Stop label, use Part number : A02PE2L.
Bezel Description Part No
Emergency stop A02ES
No of poles Part No
Double pole A02511
Single pole A02512