Datasheet

ManualsBrandsAPEM ManualsInput & Output DevicesEPO switch Red-black Turn 1 pc(s)

G-4 APEM www.apem.com

A1-A01-A02-A03 series

Industrial controls

Specifications for pushbutton, keylock and rotary switches

ELECTRICAL SPECIFICATIONS

A01 - A1 - A03 A02

• Function :

Momentary Momentary

or maintained action or maintained action

• Current/voltage rating : 10mA 5VAC min. 25mA 5VAC min.

6A 250VAC max. - 6A 12VDC max.

12A 380VAC - 16A 250VAC max.

12A 12VDC max.

• Contact gap > 1 mm (.039)

Double break 2 x 1,5 mm (.059)

• Initial contact resistance : 10m max. at 1A 4VDC 10m max. at 1A 4VDC

• Insulation resistance : 50 M min. 50 M min.

• Dielectric strength : 750V between open contacts 2KV between open contacts

5KV live to accessible 4KV live to accessible

• Electrical life (resistive load) : 50.000 cycles 50.000 cycles

• Insulation : Class 2 Class 2

• Lamp life :

LED : 60.000 h min. to 75% relative LED : 60.000 h min. to 75 % relative

luminosity - Filament : approx. 5.000 h luminosity - Filament : approx. 5.000 h

Neon : approx. 10.000 h Neon : approx. 10.000 h

• Lamp circuit diagrams

GENERAL SPECIFICATIONS

A01 - A1 - A03 A02

• Min. mechanical life :

Pushb. momentary : 1 million cycles Pushb. momentary: 1 million cycles

Pushb. maintained : 100.000 cycles Pushb. maintained : 100.000 cycles

Keylock and rotary : 100.000 cycles Keylock and rotary : 100.000 cycles

• Panel thickness 8 mm (.315) max. 8 mm (.315) max.

• Operating temperature : -20°C to +55°C -20°C to +85°C

• Solder heat resistance : 350°C, 5 sec. 350°C, 5 sec.

(IEC 68-2-20Tb, method 2)

• Degree of environmental IP 65 front of panel IP 65 front of panel

protection (IEC 529 ) IP 40 back of panel IP 40 back of panel

• Lamps : Midget Grooved T13/4, Midget Grooved T13/4,

filament, LED or neon filament, LED or neon

Special multi-LED array

• Switch terminals :

Solder/quick-connect 2,8 mm (.110) M3 screws - wire 2 x 0,75 mm

max.

• Lamp terminals :

Solder/quick-connect 2,8 mm (.110) M3 screws

Flexible wire 2 x 2,5 mm

max.

Rigid wire 4 mm

max.

Specifications for emergency stop switches : see pages 10 and 22.

For screen engraving or film legends, contact APEM.

A B A B