Datasheet

ManualsBrandsAPEM ManualsInput & Output DevicesEPO switch 240 Vac 3 A 2 breakers, 1 maker IP65 (front) 1 pc(s)

Double pole Double pole NC

Normally closed + single pole NO

APEM www.apem.com 1

New!

A02ES-H series

High-security emergency stop switches

Distinctive features and specifications

ELECTRICAL SPECIFICATIONS

• Electrical function : push to shut off, pull or twist to release

• Current/voltage rating - NC contacts :

AC-12, 3A 250VAC

AC-15, 1,5A 250VAC

DC-12, 2A 30V

DC-13, 1A 30V

• Current/voltage rating - NO contacts :

AC12, 0,6A 250VAC

AC14, 0,3A 250VAC

DC12, 2A 30V / 1A 30V

• Electrical life : 100.000 cycles

• Insulation resistance : 100 MΩ min.

• Dielectric strength : contact block 2.500 Vrms

• Contacts : gold plated silver

GENERAL SPECIFICATIONS

• Panel thickness : 6 mm (.236) max.

• Low level or mechanical life :

250.000 cycles

• Recommended torque : 2Nm

• Switch terminals : M3 screws

OPERATING FORCE

• Push to shut off : 32N

• Pull to release : 21N

• Turn to release : 0,27Nm

• Minimum force to direct opening

action : 80N

AGENCY APPROVALS

EN 60947-5-5

EN 60547-5-1

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing : IP65

• Terminals IP20 (finger safe)

• Operating temperature : -25°C to +60°C

• Storage temperature : -45°C to +80°C

PANEL CUT-OUT

The company reserves the right to change specifications without notice - Not for sale in JAPAN.

Mounting accessories : Standard hardware supplied : 1 nut and 1 flat panel seal

Packaging unit : box of 1 piece with instruction sheet. Instruction sheet also available on request.

UL 508

UL 991

CSA 22.2 No 14

❑

Approved to EN 60947-5-5, EN60547-5-1, UL 508 and CSA

❑

Pull or twist to release

❑

AC-12, 3A 240VAC / DC-12, 2A 30V

❑

Panel sealed to IP65

❑

Built-in-safety

The A02ES-H series has been designed to ensure the highest security level. By design, this product has a failsafe modular

construction.

Many other emergency stop switches are not failsafe and rely on butt action contacts: the NC contats remain closed until the

actuator is pressed. Therefore, if the switch is damaged, destroyed or assembled incorrectly, the contacts remain closed.

On the A02ES-H, if the operator or switch block become separated, the circuit will open.

Summary of content (2 pages)

PAGE 1
A02ES-H series New! High-security emergency stop switches Distinctive features and specifications ❑ Approved to EN 60947-5-5, EN60547-5-1, UL 508 and CSA ❑ Pull or twist to release ❑ AC-12, 3A 240VAC / DC-12, 2A 30V ❑ Panel sealed to IP65 ❑ Built-in-safety The A02ES-H series has been designed to ensure the highest security level. By design, this product has a failsafe modular construction.
PAGE 2
A02ES-H series New! High-security emergency stop switches Panel cut-out Ø 22 (.866) Double pole, normally closed A02ESH3B102IX0 Double pole, normally closed + Single pole, normally open A02ESH3B112IX0 Ø 60 mm name plate Anti-rotation ring Legend “EMERGENCY STOP“ is indicated outside a Ø 44 mm circle. A02-U9ZRL Locking ring wrench A02-U27Y A02ESH1512-A A02-9ZT1 2 www.apem.