Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsTamper-proof pushbutton 250 Vac 5 A 1 x Off/(On) momentary 1 pc(s)

• Max. current/voltage rating with resistive load:

- A contacts: 4 A 12 VDC, 500,000 cycles

- C contacts: 2 A 48 VDC, 10,000 cycles

• Initial contact resistance: 50 mΩ max.

• Insulation resistance: 1,000 MΩ min. at 500 VDC

• Dielectric strength:

2,000 Vrms 50 Hz min. between terminals and frame

2,000 Vrms 50 Hz min. between terminals

ELECTRICAL SPECIFICATIONS

Momentary (NO)

Impact resistance IK08 for model Ø 19 mm (.748)

and IK10 for model Ø 22 mm (.866)

Stainless steel actuator and bushing

UL-CSA approved (long case only)

DISTINCTIVE FEATURES

• Impact resistance: IK08 for model Ø 19 mm (.748),

IK10 for model Ø 22 mm

(.866)

• Optional front panel sealing: IP65 according to IEC 60529

• Operating temperature: -30 °C to +70 °C (-22 °F to +158 °F)

ENVIRONMENTAL SPECIFICATIONS

AV series

Anti-vandal pushbutton switches •

Ø 19 or 22 mm • momentary NO

• Torque: 1.5 Nm min.- 4 Nm max. applied to nut

• Panel thickness: 1 (.039) to 11 mm (.433) max.

• Low level or mechanical life: 1,000,000 cycles

• Hand soldering: 300 °C (572 °F), 3 sec. max.

GENERAL SPECIFICATIONS

• Case: PBT

• Contacts: silver (A) or brass, silver plated (C)

• Bushing: stainless steel

• Actuator: stainless steel

MATERIALS

The company reserves the right to change specifications without notice.

PANEL SWITCHES

SW-AV1922AV-1907

Summary of content (5 pages)

PAGE 1
07 2 92 1 AV AV series - SW PANEL SWITCHES 19 AV Anti-vandal pushbutton switches • Ø 19 or 22 mm • momentary NO DISTINCTIVE FEATURES Momentary (NO) Impact resistance IK08 for model Ø 19 mm (.748) and IK10 for model Ø 22 mm (.866) Stainless steel actuator and bushing UL-CSA approved (long case only) ENVIRONMENTAL SPECIFICATIONS • Impact resistance: IK08 for model Ø 19 mm (.748), IK10 for model Ø 22 mm (.
PAGE 2
PANEL SWITCHES AV series Anti-vandal pushbutton switches • Ø 19 or 22 mm • momentary NO AGENCY APPROVAL 4 A 250 VAC /8 A 125 VAC (long case only) To order switches marked UL-CSA, add “UU“ at the end of model number. ELECTRICAL FUNCTIONS Function 3 (NO) PANEL MOUNTING • Panel cut-out: Ø 19.2 mm (.755) or Ø 22.2 mm (.874) • Min. pitch for matrix mounting: 30 mm x 30 mm (1.181 x 1.
PAGE 3
Anti-vandal pushbutton switches • Ø 19 or 22 mm • momentary NO BUILD YOUR PART NUMBER BASIC PART NUMBER AV SERIES CASES BUSHING/ACTUATOR CONFIGURATIONS Models Ø 19 (.748) 09 Flat actuator 19 Curved actuator 000 Long 100 Short FUNCTION 3 NO CONTACTS TERMINALS A Silver 9 Screw C Brass, silver plated 2 Solder lug / Quick-connect Models Ø 22 (.
PAGE 4
Anti-vandal pushbutton switches • Ø 19 or 22 mm • momentary NO Hex nut 22 (.866) across flats BUSHING Ø 19 (.748) - FLAT ACTUATOR SHORT CASE - 48 VDC 4.00 (.157) ø19.00x1.00 SI (.748DIAx1.00 IS) 7.30 (.287) 5.00 (.196) 2.80 (.110) 1.20 (.047) ø22.00 (.866DIA) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. ø15.00 (.590DIA) AV091003•940 ø22.00 (.866DIA) Screw terminals AV091003•240 9.50 (.374) 2.00 (.078) • Contacts. Replace with A or C. EPOXY Ø19.00x1.00 SI (.748DIAx1.00 IS) 5.00 (.
PAGE 5
Anti-vandal pushbutton switches • Ø 19 or 22 mm • momentary NO Hex nut 25 (.984) across flats BUSHING Ø 22 (.866) - FLAT ACTUATOR LONG CASE - 4 A 250 VAC/8 A 125 VAC - UL/CSA Ø22.00x1.00 SI (.866DIAx1.00 IS) Screw terminals AV030003A940 4.00 (.157) Ø15.00 (.59DIA) Ø25.00 (.984DIA) 2.00 (.078) 15.00 (.590) BUSHING Ø 22 (.866) - CURVED ACTUATOR 10.00 (.248) 5.00 (.196) CAV03NUL Short case, screw terminals Ø15.00 (.590DIA) 3.60 (.141) AV021003•940 Long case, screw terminals 2.00 (.078) Ø25.