Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsTamper-proof pushbutton 30 Vdc 1 A 1 x Off/(On) IP67 momentary 1 pc(s)

APEM www.apem.com 1

AV series

Security pushbutton switches Ø 30 mm (1.181)

With illuminated ring - momentary (NC/NO)

SPECIFICATIONS

• Travel : 2,5 mm ± 0,3 mm (.003)

• Max. current/voltage rating with resistive load : 1A 30VDC

• LED voltage : 12VDC, 24VDC or 48VDC

(If not supplied by APEM, a resistor must be series-connected by the user)**

• Initial contact resistance : 100 mΩ max.

• Insulation resistance : 10 MΩ min. at 500VDC

• Dielectric strength : 500 Vrms 50 Hz min. between terminals

1.000 Vrms 50 Hz min. between terminals and frame

• Electrical life : 250.000 cycles at full load

• Operating force : 5N ± 2N • Torque : 10Nm max.

• Robustness : IK06 according to EN 62262 (1 joule)

• Panel thickness : 1 (.039) to 6 mm (.236) max.

• Low level or mechanical life : 1.000.000 cycles

• Operating temperature : -30°C to +85°C

• Hand soldering : 350°C, 5 seconds max.

• Packaging unit : flying lead/cable models : 1 piece - other models : 25 pieces

** Resistor value =

supply voltage - LED forward voltage

LED forward current

MATERIALS

• Case : polyamide, glass filled

• Contacts : silver

• Bushing : see next page

•

Actuator : see next page

• Elastomeric membrane : silicone

• LED

CUT-OUT

• Panel cut-out : Ø 30,2 mm (1.189)

•

Min. pitch for matrix mounting :

44 mm x 44 mm (1.732x1.732)

NC/NO

RDER FORMAT

Flat actuator - solder lug terminals

Plastic hex nut 36 (1.417) across flats

Illuminated (select LED color above) *

AV5•022

Non-illuminated

AV50022

Bushing dia. 30 mm

SERIES

LED color

0 : no LED - 1 : blue - V : green

5 : yellow - 6 : red - 7 : white - 9 : amber

LED resistor

0 No resistor supplied

1 12VDC resistor

2 24VDC resistor

4 48VDC resistor

Contacts

2 Silver

Terminals

2 Solder /

quick-connect

F Flying leads

C Cable

To order a product, select a basic

model below and add the desired LED

color and voltage. Then select the

desired options on next page.

Options : see next page.

Flat actuator - flying lead terminals

Plastic hex nut 36 (1.417) across flats

Illuminated (select LED color & resistor

above)

AV5••2F

Non-illuminated

AV5002F

* No LED resistor supplied on this model.

Wire colors : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-)

The company reserves the right to change specifications without notice.

Summary of content (2 pages)

PAGE 1
AV series Security pushbutton switches Ø 30 mm (1.181) With illuminated ring - momentary (NC/NO) ORDER FORMAT 2 AV 5 SERIES Bushing dia. 30 mm LED color 0 : no LED - 1 : blue - V : green 5 : yellow - 6 : red - 7 : white - 9 : amber NC/NO Options : see next page. 0 1 2 4 LED resistor No resistor supplied 12VDC resistor 24VDC resistor 48VDC resistor SPECIFICATIONS Contacts 2 Silver Terminals 2 Solder / quick-connect F Flying leads C Cable MATERIALS • Travel : 2,5 mm ± 0,3 mm (.003) • Max.
PAGE 2
AV series Security pushbutton switches Ø 30 mm (1.181) With illuminated ring - momentary (NC/NO) Plastic hex nut 36 (1.417) across flats Flat actuator - cable terminals Illuminated (select color & resistor) AV5••2C Non-illuminated AV5002C After selecting basic model No., fill in last 5 boxes with desired options. Flying lead protection Flying lead/ cable length Ring color Bushing / plunger mat.