Datasheet

ManualsBrandsApem ManualsJoystick & Navigation Switches3-Axis Joystick

APEM www.apem.com

Note: The company reserves the right to change specifications without notice.

HF series

Hall effect joysticks

Distinctive features and specifications

 Connectorized housing

 Shallow mounting depth <1.00”

 1, 2 and 3 axis configurations

 Voltage regulator, 24V supply option

 USB 2.0 HID interface options

 CAN bus J1939 and CANopen options

• Break Out Torque: 0.09Nm (0.80lbf in)

• Operating Torque: 0.121Nm(1.07lbf in)

• Maximum Allowable Torque: 2.50Nm(22.13lbf in)

• Hand Mechanical Angle: 60º (30º from center)

• Handle Action: Spring centering, rotational

• Expected Life: 5 million

• Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)

• Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)

• Sealing (IP): Up to IP68*

• EMC Immunity Level (V/M): EN61000-4-3

• EMC Emissions Level: EN61000-6-3:2001

• ESD: EN61000-4-2

• Output linearity: ±200mV

• Dual output interlinearity (X/Y): ±400mV

• Dual output interlinearity (Z): ±600mV

NOTES:

– All values are nominal.

– Exact specifications may be subject to configuration.

Contact Technical Support for the performance of your

specific configuration.

* Excludes some handle options.

• Break Out Force: 1.3N (0.3lbf)

• Operating Force: 2.8N (0.63lbf)

• Maximum Applied Force: 200N (45.00lbf)

• Mechanical Angle of Movement: 36º

(18º from center)

• Expected Life: 5 million

• Material: Glass filled nylon

• Package Size: 5.75” x 4.50” x 3.25”

• Lever Action: Single spring, omnidirectional

MECHANICAL (FOR X, Y AXIS) ENVIRONMENTAL

MECHANICAL (FOR Z AXIS)

SENSOR SPECIFICATIONS

• Sensor: Hall effect, single or dual

• Supply Voltage Range: 5VDC ±0.01VDC

• Supply Current: 40mA typical / 50mA max (3 axis)

• Reverse Polarity Max: -10VDC

• Transient Overvoltage Max: 16VDC

• Ratiometric Output Voltage: See options

• Output Current: 8mA

• Output Load: 1K ohm min.

• Output Impedance: 2Ω

Summary of content (9 pages)

PAGE 1
HF series Hall effect joysticks Distinctive features and specifications  Connectorized housing  Voltage regulator, 24V supply option  Shallow mounting depth <1.00”  USB 2.0 HID interface options  1, 2 and 3 axis configurations  CAN bus J1939 and CANopen options MECHANICAL (FOR X, Y AXIS) ENVIRONMENTAL • Break Out Force: 1.3N (0.3lbf) • Operating Force: 2.8N (0.63lbf) • Maximum Applied Force: 200N (45.
PAGE 2
HF series Hall effect joysticks Overview HF Output Options² Limiter Plate SERIES S R X Y P C W Z Handle 10 11 22 27 33 44 45 46 50 51 52 55 0 1 2 3 4 Square Round Slotted Slotted Plus Cross Guided Feel Square Guided Feel Round 5 6 Mounting Ball Tip (2 Axis) Tapered (2 Axis) 1 Pushbutton (2 Axis) 1 Pushbutton (2 Axis), IP67 Sealed 3 Axis 1 Pushbutton (3 Axis) 2 Pushbuttons (3 Axis) Low Profile (3 Axis) 3 Axis, IP67 Sealed 3 Axis, 1 Pushbutton, IP67 Sealed 3 Axis, 2 Pushbutton, IP67 Sealed 3 Axis, 2
PAGE 3
HF series Hall effect joysticks Overview 10 48.26 (1.90) Ø31.80 (1.25) + 48.26 (1.90) 90.58 (3.57) 7.87 (0.31) Connector 35.56 (1.40) 25.30 (0.996) 41.15 (1.62) 11 35.56 (1.40) 48.26 (1.90) Ø21.10 (0.83) + 48.26 (1.90) 93.37 (3.68) 7.87 (0.31) Connector 35.56 (1.40) 25.30 (0.996) 41.15 (1.62) 35.56 (1.40) Ø20.30 (0.80) 22 48.26 (1.90) + 48.26 (1.90) 111.76 (4.40) 7.87 (0.31) Connector 35.56 (1.40) 25.30 (0.996) 27 41.15 (1.62) 35.56 (1.40) Ø20.40 0.803 48.26 (1.90) 48.
PAGE 4
HF series Hall effect joysticks Overview 33 48.26 (1.90) Ø35.30 (1.39) + 48.26 (1.90) 100.86 (3.97) 7.87 (0.31) Connector 25.30 (0.996) 41.15 (1.62) 44 35.56 (1.40) 35.56 (1.40) 48.26 (1.90) Ø35.30 (1.39) + 48.26 (1.90) 112.00 (4.39) 7.87 (0.31) Connector 35.56 (1.40) 25.30 (0.996) 41.15 (1.62) 45 35.56 (1.40) 48.26 (1.90) Ø35.30 (1.39) + 48.26 (1.90) 112.00 (4.39) 7.87 (0.31) Connector 35.56 (1.40) 25.30 (0.996) 41.15 (1.62) 35.56 (1.40) 48.26 (1.90) 46 Ø35.30 (1.39) + 48.
PAGE 5
HF series Hall effect joysticks Overview 50 48.26 (1.90) Ø37.34 (1.47) 48.26 (1.90) 113.03 (4.45) Connector 35.56 (1.40) 25.40 (1.00) 51 41.15 (1.62) 35.56 (1.40) Ø37.34 (1.47) 48.26 (1.90) 48.26 (1.90) 120.22 (4.733) Connector 35.56 (1.40) 25.40 (1.00) 52 41.15 (1.62) 35.56 (1.40) Ø37.34 (1.47) 48.26 (1.90) 48.26 (1.90) 114.38 (4.503) Connector 35.56 (1.40) 25.40 (1.00) 35.56 (1.40) 41.15 (1.62) 55 Ø57.404 (2.26) 48.26 (1.90) 35.56 (1.40) 120.40 (4.74) 35.56 (1.40) 48.
PAGE 6
HF series Hall effect joysticks Overview PANEL CUT-OUT DIMENSIONS Ø41.28 (1.625) Ø41.91 (1.650) Ø3.18 x 4 places (0.125) 35.56 (1.40) Ø3.18 x 4 places (0.125) 35.56 (1.40) 35.56 (1.40) 35.56 (1.40) DROP-IN (1) REAR MOUNT (4) * Not available for Option 11 and 55 Handles MOUNTING OPTIONS 4-40 x 9/16 Phil Panhead 23.83 (0.938) Brass insert 4 places 4-40 x 3/8 Phil Panhead Brass insert 4 places DROP-IN (1) CLAMPING RING 35.56 (1.40) 7.10 (0.28) 30.05 (1.
PAGE 7
HF series Hall effect joysticks Overview VOLTAGE OUTPUT OPTIONS¹ OPTION 0 4.5 4.0 4.0 3.0 2.5 2.0 1.5 1.0 3.5 3.0 2.5 2.0 1.5 1.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.5 0 0 0 MIN TRAVEL (º) MAX OPTION 4 MIN TRAVEL (º) MAX OPTION 5 5.0 OUTPUT VOLTAGE (V) 4.5 4.0 OUTPUT VOLTAGE (V) 4.5 3.5 3.5 3.0 2.5 2.0 1.5 1.0 0.5 MIN TRAVEL (º) 0 MAX OPTION 6 5.0 4.5 4.0 4.0 3.0 2.5 2.0 1.5 1.0 3.0 2.5 2.0 1.5 1.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0.
PAGE 8
HF series Hall effect joysticks Overview USB USB Featuring USB 2.0 HID compliant interface, APEM’s USB joysticks are recognized as standard HID “game controller” devices. Adhering to the HID specification, APEM’s USB joysticks are plug-and-play with most versions of Windows. Joystick button and axis assignments are dependent upon the controlled application. FEATURES • USB 2.
PAGE 9
HF series Hall effect joysticks Overview CAN bus CAN bus ELECTRICAL SPECIFICATIONS • Operating voltage: 6V to 35V • Current consumption: TBD (typical: 35mA @ 12V, 18mA @ 24V, 15mA @ 30V) • Output signal: CAN bus • Reverse connection protected: Yes • Short-circuit protected against + UB max: Yes • Short-circuit protected against GND: Yes • CAN: ISO 11898, CAN specification 2.0A/ 2.