Datasheet

ManualsBrandsAPEM ManualsPush Actuated Switches & ButtonsPushbutton 24 Vdc 2 A 1 x Off/(On) IP67 (front) momentary 1 pc(s)

APEMAPEM

IA series

Low profile pushbutton switches

ELECTRICAL AND GENERAL SPECIFICATIONS

• Max. current/voltage rating with resistive load : 2A 24VDC

• Initial contact resistance : 100mΩ max.

• Insulation resistance : 100 MΩ min. at 500VDC

• Dielectric strength : 1.000 VAC rms

• Electrical life at full load : 1 000.000 cycles

• Panel thickness : 7 mm (.276) max.

• Total travel : 1,5 mm +

/- 0,3

(.059 +

/ .012

)

• Operating force : 6,5 N ±2N

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing (see drawings below) :

- With O-ring above the panel : IP67

- With O-ring under the panel : IP64

• Operating temperature : -20°C to +65°C

MATERIALS

• Case/bushing : thermoplastic

• Actuator : polyurethane

• Contacts : silver

• Terminal seal : epoxy

SERIES

Shape

R Round

Electrical function

3 Normally open

(NO)

5 NC/NO combined

minals

F Wire leads

Contacts

1 Silver

Plunger col.

1 Blue

2 Black

3 Green

5 Y

ellow

6 Red

7/1 White

9 Orange

Case colour

00 Black

PANEL MOUNTING

Sealing to Sealing to

IP64 IP67

• Resistant to frost, sand and

hydrocarbons

• Front panel sealed to IP 67

• Tactile feedback

➞

O-ring

Summary of content (2 pages)

PAGE 1
APEM IA series Low profile pushbutton switches • Resistant to frost, sand and hydrocarbons • Front panel sealed to IP 67 • Tactile feedback ELECTRICAL AND GENERAL SPECIFICATIONS • Max. current/voltage rating with resistive load : 2A 24VDC • Initial contact resistance : 100mΩ max. • Insulation resistance : 100 MΩ min. at 500VDC • Dielectric strength : 1.000 VAC rms • Electrical life at full load : 1 000.000 cycles • Panel thickness : 7 mm (.276) max. • Total travel : 1,5 mm +/- 0,3 (.059 +/ .
PAGE 2
IA series - Low profile pushbutton switches Bushing Ø 16 (.629) • Panel cut-out Ø 16,2 mm (.657) • Min. pitch for matrix mounting : 20 x 20 mm (.787x.787) • Standard hardware supplied : 1 knurled nut and 1 O-ring • Packaging unit : 25 pieces N0 NC/NO combined MODEL STRUCTURE Models 1.20 (.047) Ø16.00x1.00SI (.629DIAx1.00IS) 3.30 (.129) NO model has 2 terminals only. Ø15.00 (.590 DIA) 15.50 (.610) NC/NO combined EPOXY 10.00 (.393) 1.50 Maxi (.059 MAX) IAR5F C NC NO 500.00±10 (19.685±.