Datasheet

ManualsBrandsApem ManualsNon-Illuminated Pushbutton SwitchesPushbutton Switch, 400 mA @ 32 VAC /100 mA @ 48 VDC

APEM www.apem.com B1-25

IB and IS series

Sealed pushbutton switches - bushing Ø 12 mm - momentary

Distinctive features and specifications

❑

Snap-in and threaded bushing models

❑

Compact, light in weight

•

Behind-panel depth of 13 mm (.512) only

• 50 % reduction in weight compared to metallic models

❑

Tactile feedback

❑

Sealed to IP67 (IS series) or IP54 (IB series)

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing according to IEC 60529 : IP67 (IS) or IP54 (IB)

• Shock resistance : 100 g according to IEC 512-4, test 6c

• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d

• Salt spray : IEC 512-6, test 11f

• Operating temperature : -40°C to +85°C

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

400mA 32VAC - 100mA 48VDC

• Initial contact resistance : 50 mΩ max.

• Insulation resistance : 1 GΩ min. at 500VDC

• Dielectric strength : 1.000 Vrms

• Electrical life at full load : 500.000 cycles

MATERIALS

• Case : thermoplastic UL94-V0

• Actuator : polyamide 6/6

• Bushing/bezel : polyamide 6/6

• Contacts : silver, gold plated

• Terminal seal : epoxy

Exam

e o

f c

tom

tch:

see

nd of the seri

GENERAL SPECIFICATIONS

• Panel thickness :

- IB series : 0,8 mm (.031) min. - 1,8 mm ( .071) max.

- IS series : 1,5 mm (.059) min. - 4 mm (.157) max.

• Total travel : 1,7 mm (.066) +/- 0,3 mm

• Typical operating force : 4N +/- 3N

• Low level or mechanical life : 1.000.000 cycles

• Torque (applied to nut) : 1 Nm max. with metal nut U166

1,5 Nm max. with plastic nut U4248

• Soldering : 300°C max. for 3 seconds

AGENCY APPROVAL

2A 125VAC/250VAC

File E83438

Availability : consult factory for

details of approved models.

Marking : to order switches marked

UL, complete approrpiate box of

ordering format.

Panel mounting : see next pages.

The company reserves the right to change specifications without notice.

UG1410-A-R1

Summary of content (4 pages)

PAGE 1
IB and IS series Sealed pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410-A-R1 ❑ Snap-in and threaded bushing models ❑ Compact, light in weight • Behind-panel depth of 13 mm (.
PAGE 2
IB and IS series Sealed pushbutton switches - bushing Ø 12 mm - momentary Overview SERIES IB Snap-in IS Threaded bushing Actuator shapes R P Round, curved Round, flat 3 Electrical function Terminals Normally open (NO) S Solder lug P Straight PC Z1 Quick-connect 2,8 x 0,5 mm Contacts AD Silver, gold plated B1 Actuator colours 1 B 2 3 4 5 6 7/1 8 9 A Blue Dark blue Black Green Grey Yellow Red White Bright chrome Orange Satin chrome Bezel finish 00 08 10 20 Black (std) Bright chrome (IS only) Whi
PAGE 3
IB and IS series Sealed pushbutton switches - bushing Ø 12 mm - momentary • Ten actuator colours • Curved or flat actuator • Antirotation bushing Solder lug S Quick-connect Z1 3.40 (.133) 1.00 (.039) 1.50 (.059) 1.20 (.047) 1.20 (.047) 2.80 (.110) 2.80 (.110) Function 3 (NO) MODEL STRUCTURE 8.40 (.330) 2.40 (.094) Straight P CISCOS-A CISCOSP ECH: 0.9 ECH: 0.9 Actuator marking available on IBP and ISP models (symbol 10 mm max.). On request.
PAGE 4
IB and IS series Ø12.00 (.472DIA) 4.70 (.185) Ø12.00 (.472DIA) ACTUATOR OPTION 4.70 (.185) Sealed pushbutton switches - bushing Ø 12 mm - momentary 104 : High actuator IBR IBP APPROVAL UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete above box with ”UL”. IB SERIES MOUNTING Panel cut-out 18.00 (.709) 1.80 MAXI. (.071MAX.) 12.90 (.507) Matrix mounting 0.80 MINI. (.031MIN.) 18.00 (.709) 18.00 (.709) Ø13.60 (.