Datasheet

K range
Power rocker switches and indicators
Accessories for K R, KL and KI series
APEMwww.apem.com34
MOUNTING PANEL CUT-OUT
For 1 element U2267 For 2 elements U2261 For 3 elements (2xU2261 + 1x U2262)
MOUNTING PANEL END
U2261
MOUNTING PANEL MIDDLE
U2262
(1.898 0/+.008)
48.20 0/+0.20
51.30 0/+0.20
(2.020 0/+.008)
C
(3.051 0/+.008)
77.50 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(.984 0/+.008)
25.00 0/+0.20
48.20 0/+0.20
(1.898 0/+.008)
(
1.152)
29.26
56.00
(2.205)
(1.043)
26.503.80
(.150)
C
(2.205)
56.00
26.26
(1.034)
(.150)
3.80 26.50
(1.043)
C
SINGLE MOUNTING PANEL
U2267
(.150)
3.80 26.50
(1.043)
(2.205)
56.00
32.26
(
1.270)
For additional elements, add 26,40 mm (1.039)
Recommended panel thickness : 1,10 mm - 1,80 mm - 2,60 mm - 3,40 mm - 4,20 mm - 5 mm - 5,80 mm
2 tools are supplied
ACTUATOR REMOVING TOOL
EXTRACT ACTUATOR (KR ONLY)
Allows the extraction of the rocker / rocker support assembly.
Place the 2 claws under the support and push as indicated by the arrow.
EXTRACT ROCKER (KR ONLY)
Allows to separate the rocker from its support.
Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the
opposite direction.
EXTRACT SWITCH (KR, KL AND KI)
Allows to extract switch from panel mounting units. 2 tools are necessary.
Insert the tools between switch and panel mounting units from the rear to compress the snap-
in device. Pull off switch manually.
U3052