Datasheet

APEMwww.apem.com4
KR series
Power rocker switches
Specifications
SEALING
Sealing is optional.
To order a sealed product,
complete the appropriate box of
ordering format on the following
pages.
Packaging unit : 40 pieces
❑❑
Unique rocker design
❑❑
Wide choice of colours
❑❑
Laser etched symbols
❑❑
Illuminated or non-illuminated
❑❑
Optionally sealed to IP68
ELECTRICAL SPECIFICATIONS
• Currrent/voltage rating with resistive load :
- Silver contacts (A) : 5A 24VDC, 100.000 cycles
10A 24VDC, 10.000 cycles (terminals 6.35 x 0.8 only)
- Gold plated contacts (D) : 20mA 12V, 150.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals
• Mechanical life :150.000 cycles min.
MATERIALS
• Case : PA 6-6
• Actuator : ABS
• Bezel : PA 6-6
• Terminals : brass, silver plated
• Contacts : silver (A)
or silver, gold plated (D)
• Contact roller : brass, nickel plated
ENVIRONMENTAL SPECIFICATIONS
• Degree of protection of sealed versions : frontal sealing to IP68
according to IEC 60529 (submersion under 1 meter of water for more than
30 minutes)
• Salt spray resistance : 96 hours according to IEC 512-6, test 11f
• Vibration resistance : 10-500 Hz / 10 g per IEC 60068-2-6
• Operating temperature : -40°C to +85°C
DIMENSIONS
Dimensions : First dimensions are in mm while
inches are shown as bracketed numbers.
Tolerance : The general tolerance for
dimensions in this brochure is ± 0,3 (.012).
Overall dimension tolerance is ± 0,5 (.020).
FICHIER: CKR46DT-P4
le 21/06/07
ECHELLE: 0.625
indice C
(.433)
11.00
(
1.
8
30)
4
6.
5
0
(1.398)
35.50
50.00 Max
(1.969 Max)
25.00
(.984)
47.00
(1.850)
24.00
(.944)
U2282
12.00
(.472)
➞
Flat seal
Dimensions, specifications and data shown in this brochure are subject to change without notice.