Datasheet

ManualsBrandsApem ManualsLED DriversLED Remote Control System 144W 4A 24V

1/5

Product Specifications

Model number

：

LSTC12-4A-RGB-AS

Product name

：

Aluminum shell RF 24 keys RGB controller

Product Description

24-key aluminum RF controller uses an advanced micro control unit, The product can be used for controlling

a variety of lamps whose source of light is LED. For instance, point source of light, flexible light strip, wall

washer lamps, glass curtain wall lights and so on. Advantages include ease of connection and simplicity in use.

RF remote control enables customers to adjust brightness, static colour choices and various dynamic changes

in lighting effects.

Technical Parameters

Working temperature

-20-60℃

Supply voltage

12V~24V optional

0utput 3 channels

Connecting mode common anode

External dimension L130*W64*H24 mm

Packing size L137*W80*H54mm

Net weight

185g

Gross weight

215g

Static power consumption

<1W

Output current

<4A per channel

Output power 12V/4A < 144W

Summary of content (5 pages)

PAGE 1
Product Specifications Model number：LSTC12-4A-RGB-AS Product name：Aluminum shell RF 24 keys RGB controller Product Description 24-key aluminum RF controller uses an advanced micro control unit, The product can be used for controlling a variety of lamps whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamps, glass curtain wall lights and so on. Advantages include ease of connection and simplicity in use.
PAGE 2
External Dimensions （Controller size）（Remote Control Keypad size） 2/5
PAGE 3
Connection description: Power input interface (port1): Uses conventional power jack driver (12vDC or 24vDC input) socket as a DC power input from suitable Power input interface (port2): Alternative DC connection with screw terminals. Load output interface: Colour coded screw terminals for LED strip.
PAGE 4
Directions for use ● Connect the colour-coded wires first (LIGHT), following by the power wires (POWER). Ensure no short circuit cannot occur between connecting wires before you turn on the power. ● Each time a key on the remote is pressed, the indication light will blink, indicating that the selected mode is functioning. ● Speed and brightness levels can be adjusted. ● Additional memory function works if power is lost and then restored.
PAGE 5
Cautions 1、The Input voltage for this product is DC12V or DC24V, other input voltages should not be used. 2、Lead wires should be connected according to the wire colours and the connecting diagram. 3、Overloads could damage the controller and should be avoided.