Datasheet

ManualsBrandsApem ManualsJoystick & Navigation SwitchesBuilt-in Joystick

M series

Miniature resistive joysticks

Distinctive features and specifications

 World’s #1 selling joystick for CCTV applications

 Potentiometric sensing

 One, two or three axis

 Low profile design with 17 handle options

 RoHS

APEM www.apem.com

Note: The company reserves the right to change specifications without notice.

Potentiometer P M R

Electrical Element Conductive Plastic Conductive Plastic Conductive Plastic

Track Resistance 5K 5K 5K

Linearity ±1.0% ±5.0% ±1.0%

Track Operating Angle 220º 56º 50º

CRV ±1.5% ±1.5% ±1.0%

Power Dissipation 0.25W@40ºC 0.5W@70ºC 1W

Rotational Life 1,000,000 1,000,000 10,000,000

POTENTIOMETER OPTIONS

MECHANICAL (FOR X AND Y AXIS)

• Break Out Force: 0.7N (0.16lbf)

• Operating Force: 1.3N (0.29lbf)

• Maximum Applied Force: 100N (22.48lbf)

• Mechanical Angle of Movement: 56˚

• Expected Life: See potentiometer options

• Mass/weight: Varies

• Package Size (mm) (L x W x H) or (Dia x H): Varies

• Lever Action (Centering): Spring or Friction

MECHANICAL (FOR Z AXIS)

• Break Out Torque: 0.022N·m (0.19lbf·in)

• Operating Torque: 0.040N·m (0.35lbf·in)

• Maximum Allowable Torque: 0.049N·m (0.43lbf·in)

• Mechanical Angle: 90º

• Handle Action: Spring

ENVIRONMENTAL

• Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)

• Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)

NOTES: – All values are nominal.

– Specifications are subject to the joystick configuration.

Contact Technical Support for the performance of your specific configuration.

– The M Series is intended for internal applications.

CENTERING OPTIONS

• SPRING CENTERING: The joystick returns to center when the handle is released.

• TORQUE SET: Torque set provides absolute positioning with uniform friction applied to “X” and “Y” axis.

Summary of content (4 pages)

PAGE 1
M series Miniature resistive joysticks Distinctive features and specifications  World’s #1 selling joystick for CCTV applications  Potentiometric sensing  One, two or three axis  Low profile design with 17 handle options  RoHS MECHANICAL (FOR Z AXIS) MECHANICAL (FOR X AND Y AXIS) • • • • • • • • Break Out Force: 0.7N (0.16lbf) Operating Force: 1.3N (0.29lbf) Maximum Applied Force: 100N (22.
PAGE 2
M series Miniature resistive joysticks Overview 1 M 1 Mounting Bezel SERIES C F L Handle Split Bezel Square Bezel Rubber Boot Kit Model 1 2 3 4 Centering 2 Axis 2 Axis with Pushbuttons 3 Axis 3 Axis with Pushbuttons 0 6 Spring Centering Torque Set (Friction) 0 1 2 3 5 6 8 9 A B C E G H M N Q Tapered Convex Concave Tip Flat Tipped Concave Tip - Long Pushbutton Straight Tip - Short 3 Axis 3 Axis with Pushbutton Straight Tip - Mid Straight Tip - Long Ball Tip Pushbutton Pushbutton Pushbutton 3 A
PAGE 3
M series Miniature resistive joysticks Overview 2 AXIS WITH OPTION A HANDLE 28o 28o 40.10 (1.58) 33.00 (1.30) 25.40 (1.00) See handle models and dimensions. 4.83 (0.19) 20.05 (0.79) 40.10 (1.58) 50.04 Ø27.70 (1.97) (1.09) 25.70 (1.01) Ø1.80 (0.07) Ø3.60 (0.14) Used for Rear Mount “Square bezel” 29.97 (1.18) 50.04 (1.97) NOTES: 1. Mechanical dimensions represent a joystick with the largest potentiometer option. 2. Potentiometer size will vary according to selected option.
PAGE 4
M series Miniature resistive joysticks Overview 3 AXIS 8 M 35.60 (1.40) 35.60 (1.40) 42.40 (1.67) 42.20 (1.66) 59.90* (2.36) 59.70* (2.35) 3 AXIS WITH PUSHBUTTONS 9 N 35.60 (1.40) Q 1.50 (0.06) 35.60 (1.40) 2.00 (0.08) 52.80 (2.08) (1.40) 35.60 52.80 (2.08) 52.80 (2.08) 71.40* (2.81) 71.40* (2.81) 70.40* (2.77) 1.50 (0.06) NOTES: 1. Dimensions are in mm/(inch). 2. Pushbuttons are not sealed. Joysticks are intended for internal applications only. 3. Axis orientation: + Z Y+ X- 4.