Datasheet

ManualsBrandsAPEM ManualsLEDs & AccessoriesLED indicator light Blue 24 Vdc

www.apem.com

Q-SERIES 16mmØ Panel Mounting LED Indicator

Product Specification

Intensity (Typical) at |op Standard Prominent Flush Forward Voltage

(all voltages) (all voltages)

HE Red 80mcd 10mcd 2.0V

Green 40mcd 5mcd 2.2V

Yellow 30mcd 4mcd 2.1V

Blue 280mcd 10mcd 3.2V

White 350mcd 20mcd 3.2V

Bi-colour (Typical) (Red/Green) 80/50mcd 14/10mcd 2.0V/2.2V

Tri-colour (Typical) (Red/Green/Yellow) 80/50/50mcd 14/10/10mcd 2.0V/2.2V/2.1V

Bi-colour - The colour is changed by reversing the polarity of the supply voltage.

Tri-colour - The indicator has red and green LEDs, when both connected yellow is produced.

Super Bright Prominent Flush Forward Voltage

(all voltages) (all voltages)

HE Red 7,500mcd 2000mcd 2.2V

Green 4,100mcd 250mcd 3.5V

Yellow 2,500mcd 350mcd 2.3V

Blue 1,300mcd 300mcd 3.7V

White 1,900mcd 200mcd 3.7V

Luminous intensity will be reduced with lower operating current.

Max Reverse Voltage: 5V

Viewing Angle: 100° (dependant on model)

Life Expectancy: 100,000 hours

Operating Temperature Range: –40 to

85°C

Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.

The company reserves the right to change specifications without notice.

Distinctive Features and Specifications

• 16mmpanelmountingLEDindicator

• 10mmcoloureddiffusedepoxylensor10mmwaterclearsuperbrightLEDs

• Brightchrome,blackchrome,satingrey,platedbrassbezelfinish

• Brightchrome,satingrey,goldandblackABSplasticbezelfinish

• Prominentandflushbezelstyles

• 2VDC–220VAC

• (2.8x0.8)terminals,pinsor(200mmlong)wireterminations

• IP67sealingoption(EN60529)

• Suppliedwithfixingnutandspringwasher

NB: UL Recognised Component

Switch Voltage Operating Voltage Vop Operating Current |op

(Min to Max) (Typical All Types)

2VDC (No Resistor) 1.8 to 2.5VDC 20mA

12VDC 10.8 to 13.2VDC 20mA

24VDC 21.6 to 26.4VDC 20mA

28VDC 25.2 to 30.8VDC 20mA

110VAC

99 to 121VAC

6mA

230VAC

207 to 253VAC

3mA

PANEL CUTOUT

Ø 16,00 ±0,1

TECHNICAL SPECIFICATIONS

Summary of content (3 pages)

PAGE 1
Q-SERIES 16mmØ Panel Mounting LED Indicator Product Specification Distinctive Features and Specifications • • • • • • • • • 16mm panel mounting LED indicator 10mm coloured diffused epoxy lens or 10mm water clear super bright LEDs Bright chrome, black chrome, satin grey, plated brass bezel finish Bright chrome, satin grey, gold and black ABS plastic bezel finish Prominent and flush bezel styles 2VDC – 220VAC (2.8 x 0.
PAGE 2
Q-SERIES 16mmØ Panel Mounting LED Indicator Technical Drawings prominent BEZEL SOLDER LUG/FASTONS WIRES PINS ±10 SHORT BODY PINS SHORT BODY WIRES ±10 FLUSH BEZEL SOLDER LUG/FASTONS WIRES PINS ±10 SHORT BODY PINS SHORT BODY WIRES ±10 Note: The company reserves the right to change specifications without notice. www.apem.
PAGE 3
Q-SERIES 16mmØ Panel Mounting LED Indicator Ordering Overview STANDARD OPTIONS The Q16 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 16 F 1 G XX Y 24 SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOUR VOLTAGE Q 16 = Ø16mm P = Prominent 1 = Solder Lug/ Fastons (2.8 x 0.