Datasheet

www.apem.com
QS series
Snap-in Panel Mount LED indicators
OPTION SELECTION
• Gold faston terminal denotes Anode (+), silver terminal denotes Cathode (-).
• Standard wire length is 200mm, red wire denotes Anode (+), black wire denotes Cathode (-).
For other wires lengths consult APEM (6mm and 8mm use 24AWG, 10mm and 12mm use 22AWG).
• For LEDs with alternative voltages consult APEM.
• Bi-color LEDs, by connecting to gold faston (+) one color is produced, by reversing the supply voltage
another color is produced – bi-colors are available up to 28VDC (AC products not available).
• Take care if soldering to the faston terminals.
• All 110VAC and 220VAC LED indicators will be supplied with high brightness LEDs.
• 2VDC (02) versions are resistorless – please pay attention to the forward voltage.
• Flashing LEDs are available as a special option.
TECHNICAL CHARACTERISTICS
Note: The company reserves the right to change specifications without notice.
TERMINALS
1 = Solder lug/faston
3 = Wires
MOUNTING HOLESERIES
6 = 6mmØ
8 = 8mmØ
10 = 10mmØ
12 = 12mmØ
VOLTAGE
02 = 2VDC
12 = 12VDC
24 = 24VDC
28 = 28VDC
110 = 110VAC
220 = 220VAC
LED COLOR
R = Red
G = Green
Y = Yellow
B = Blue
O = Orange
W = White
HR = High Brightness Red
HG = High Brightness Green
HY = High Brightness Yellow
HB = High Brightness Blue
HO = High Brightness Orange
HW = High Brightness White
RG = Red/Green
TYPE OF ILLUMINATION
XX = Fixed Light
YY = Bi-color
QS