Datasheet

4
www.apem.com
QS SERIES Snap-in Panel Mount LED Indicators
Order Overview
STANDARD OPTIONS
QS 8
• Gold solder lug/Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 270°C - 2 sec)
•
•
The Tri-color LED has red and green LEDs when both are connecte
d yellow is produced
•
•
•
Maximum panel thickness 11mm
We recommend using high brightness LEDs for use at 220VAC
For resistorless versions (02) please pay attention to the forward voltage
For multi-voltage options please consult APEM
QS
Example QS83XXR220
Ø8mm mounting hole with wire terminations
fixed light, Red 220VAC
SERIES TERMINALS
R = Red
G = Green
Y = Yellow
B = Blue
W = White (clear)
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
RYG = Red/Yellow/Green
RG = Red/Green
LED COLOR
02 = 2VDC
06 = 6VDC
12 = 12VDC
24 = 24VDC
28 = 28VDC
110 = 110VAC
220 = 220VAC
VOLTAGE
The QS Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
TYPE OF
ILLUMINATION
MOUNTING
HOLE
1 = Solder lug/
faston
3 = Wires
XX = Fixed light
YY = Bi-color
ZZ = Tri-color
KK = Flashing light
(only up to 28VDC)
XX
3
R
220
6 = Ø6mm
8 = Ø8mm
10 = Ø10mm
12 = Ø12mm
APEM