Datasheet

APEM www.apem.com
Note: The company reserves the right to change specifications without notice.
SN series
Hall effect T-bar fader
Distinctive features and specifications
 Consistent smooth feel
 Precision ball race bearings & PTFE guides
 Latest generation Hall effect sensor
 12 bit resolution
 “Barrel” or “Bullet” aluminum handles
 Analog voltage or PWM output options
 Absolute positioning
 Industry standard mounting
MECHANICAL
• Operating Force: 0.5N
• Mechanical Angle of Movement: 63˚(±31.5˚from center)
• Expected Life: 1 Million Operations
• Mass/Weight: 65g
• Package Size (mm) (L x W x H) or (Dia x H): 75 x 96 x 42mm
• Lever Action (Centering): Friction Clutch
ELECTRICAL SENSOR
• Sensor: Hall effect
• Output at Center: V/2 ± (5% x Gain)
• Power Supply: 5V ± 0.5V Transient free
• Reverse Polarity Max: -10VDC
• Overvoltage Max: 20VDC
• Output Voltage: 0V to 5V
(See gain options)
• Output Impedance: 10Ω
• Current Consumption Typ: 13mA
• Load: Minimum 10K, preferred 100K+
ENVIRONMENTAL
• Operating Temperature: -20ºC to +70ºC (-4ºF to +158ºF)
• Storage Temperature: -40ºC to +70ºC (-40ºF to +158ºF)
• Sealing (IP): Not sealed. For internal applictions only.
MATERIALS
• Body: Mineral filled nylon - Black
• Lever: Acetyl - Black
• Handle: Aluminum - Silver anodized
• Screening Plates: Mild Steel - Zinc plated
NOTES:
– All values are nominal.
– All specifications shown are based on a standard
configuration and are provided for guidance only.
– Please contact factory for assistance on how to achieve
the best performance from your chosen configuration.
Handle
S Barrel Handle
N Bullet Handle
Polarity
S Standard
R Reversed
Gain
01 ±50%xV
02 ±40%xV
03 ±30%xV
04 ±25%xV
05 ±10%xV
OutputSERIES
1 Analog
2 PWM
SN
Output Voltage Polarity
Low Voltage Low VoltageHigh Voltage High Voltage
Standard Reversed
Solder LugsSolder Lugs
Barrel Handle Bullet handle