Datasheet

ManualsBrandsApem ManualsSlide SwitchesSlide Switch On-On 1P

E-6 APEM www.apem.com

TG series

Tiny slide switches

Overview and specifications

SERIES

Number of poles

3 Single pole

Electrical functions

6 ON - ON

9 ON OFF ON

Terminals

P0 Straight PC

Y0 Straight PC, bracket mounting

W0 Right angle, horizontal mounting

MW Wire-wrap

Contact and terminal

materials

0 Brass, gold plated (std)

1 Brass, silver plated

3 Brass, gold plated (1,27 μ gold)

8 Contact brass, gold plated

+ tin plated terminals

9 Contact brass, gold plated

(1,27 μ gold) + tin plated term.

Actuators

00 High (standard)

10 Flush

Model

00 Standard

50 Washable

Dimensions : First dimensions are in mm while inches are shown as bracketted numbers.

Packaging unit : 100 pieces, except for models with right angle terminals (50 pieces)

SPECIFICATIONS

• Current/voltage rating with resistive load :

- Gold plated contacts : 0,4VA 20V max. AC or DC.

- Silver plated contacts : 0,5A 48V max. AC or DC

• Contact resistance : 20 mΩ max.

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength : 1.000 Vrms 50 Hz min. between terminals and frame

500 Vrms 50 Hz min. between terminals

• Electrical life at full load : 2 position switches : 60.000 cycles

3 position switches : 30.000 cycles

• Travel : 2,60 mm (.102)

• Operating temperature : -30°C to +85°C

• Cleaning : solvents or water + detergent

• Wave soldering : 260°C - 5 sec. max.

MATERIALS

• Case : flame retardant

thermoplastic

• Actuator : thermoplastic

• Ground plate and bracket :

brass, tin plated

• Contacts and terminals :

see above

•

Rubber seal : silicone, transparent

• Terminal seal : epoxy

❑

Sealed

• Single piece case

• Epoxy sealed terminals

❑

Wide variety of contact materials

❑

Same PCB layout as TL, TP and TR tiny series

UG1006-A

Summary of content (3 pages)

PAGE 1
TG series Tiny slide switches Overview and specifications ❑ Sealed UG1006-A • Single piece case • Epoxy sealed terminals ❑ Wide variety of contact materials ❑ Same PCB layout as TL, TP and TR tiny series SPECIFICATIONS MATERIALS • Current/voltage rating with resistive load : - Gold plated contacts : 0,4VA 20V max. AC or DC. - Silver plated contacts : 0,5A 48V max. AC or DC • Contact resistance : 20 mΩ max. • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 1.000 Vrms 50 Hz min.
PAGE 2
TG series Tiny slide switches Standard or washable Y0 3.05 (.120) 5.55 (.218) 9.10 (.358) 12.60 (.496) 9.60 (.377) 12.60 (.496) • Straight PC, right angle or wire-wrap terminals • Single pole • The silicone rubber seal can be removed after cleaning. P0 W0 To complete the following part numbers, refer to "Overview" and replace the • symbol with one of the options proposed under "Contact and terminal materials". Straight PC terminals - standard model 2.50 (.098) OFF 1.00 (.
PAGE 3
TG series Tiny slide switches Standard or washable 3.30 (.129) 0.50 (.019) OFF ON ON 2.54 (.100) 0.70 (.027) 2.54 (.100) 2.54 (.100) 10.16 (.400) 5.00 (.196) 2.54 (.100) 2.54 (.100) 11.10 (.437) 2.50 (.098) 2.54 (.100) 2.50 (.098) 0.70 (.027) 10.10 (.397) 0.40 ) 5 (.01 0.70 (.027) 0.50 (.019) 2.54 (.100) 5.55 (.218) 2.54 (.100) 10.10 (.397) 0.40 ) 5 (.01 3.05 (.120) 5.08 (.200) 5.08 (.200) Ø1.10 (.043 DIA) 2.54 (.100) 5.08 (.200) 3.30 (.129) 5.08 (.200) ON ON 4.75 (.187) 2.50 (.