Datasheet

ManualsBrandsApem ManualsNon-Illuminated Pushbutton SwitchesPushbutton Switch 1CO ON-(ON)

B-6 APEM www.apem.com

SMT TP series

Surface mount tiny washable pushbutton switches

Distinctive features and specifications

❑

Entirely designed for surface mount

❑

Tape and reel packaging

❑

Reflow solderable

• High temperature plastic materials

• Tin plated ground plate

• Terminal coating : tin alloy over nickel plating

• Terminals turned to the outside, preventing the shadow effect in infrared soldering and

permitting visual inspection of solder joints

• Distance between case and circuit : 0,55 mm (.021)

• End stackable with 10,16 mm (.40) pitch

• Available with positioning pins to ensure switch orientation during the reflow process

and increasing switch mechanical resistance

❑

Protected against electrostatic discharges (ESD) up to 10 KV

❑

Washable

Construction withstands cleaning processes, including hot water under pressure

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load :

0,4VA 20V max. AC or DC

• Minimum load : 10mA 50mV or 10μA 5VDC

• Initial contact resistance : 50 mΩ max

• Insulation resistance : 1.000 MΩ min. at 500VDC

• Dielectric strength : 1.000 Vrms. 50 Hz min. between terminals and frame

500 Vrms. 50 Hz min. between terminals

• Electrical life at full load : 60.000 cycles

• Static resistance : 10 KV (Schaffner equipment)

GENERAL SPECIFICATIONS

• Actuator travel : function 2 : 1 mm (.039) - function 3 : 0,8 mm (.031)

• Operating temperature : -40°C to +85°C

• Moisture resistance : 21days per IEC 512-6 test 11c

• Vibration resistance : 10-500 Hz / 10 g per IEC 512-4 test 6d

• Shock resistance : 50 g per IEC 512-4 test 6c

MATERIALS

• Case : high temperature plastic material UL94-V0

• Actuator : high temperature plastic material UL94-V0

• Ground plate and positioning pins : steel, tin plated

• Contacts : brass, gold plated

• Terminals : brass, with pure tin plating over nickel barrier

SOLDERING AND CLEANING

• Reflow soldering : infrared, vapor phase or infrared convection

• Washable per IEA-RS448-2 :

- water + detergent - preferred

- solvents

• Further information on reflow soldering : see end of catalogue.

Standard packaging unit : 700 pieces

Tape meeting international standard IEC -

Publication 286-3 (EIA481A)

Start leader : 400 mm min.

Tape width

24.00 (.944) 44.00 (1.732)

Reel

(dimension A)

24.40+2.00/0.00

(.960+.078/.000)

44.40+2.00/0.00

(1.748+.078/.000)

Dimensions : First dimensions are in mm while inches are shown as bracketted numbers.

PACKAGING

Unrolling direction

Ø13.00±0.25

(.511 DIA±.009)

Ø360.00 Maxi

(14.173 DIA MAX)

(3.937 DIA MIN)

Ø100.00 mini

3.00

(.118)

(1.590±.003)

(1.732±.011)

(.303)

40.40±0.10

44.00±0.30

7.70

CTPBRWS

12.00

(.472)

UG1006-A

Summary of content (2 pages)

PAGE 1
SMT TP series Surface mount tiny washable pushbutton switches Distinctive features and specifications ❑ Entirely designed for surface mount ❑ Tape and reel packaging UG1006-A ❑ Reflow solderable • High temperature plastic materials • Tin plated ground plate • Terminal coating : tin alloy over nickel plating • Terminals turned to the outside, preventing the shadow effect in infrared soldering and permitting visual inspection of solder joints • Distance between case and circuit : 0,55 mm (.
PAGE 2
SMT TP series Surface mount tiny washable pushbutton switches • With or without positioning pins • Single pole 1 Function 3 (OFF - MOM) B Pushbutton switches Ø2.50 (.098 DIA) TP33WS83500 OFF MOM 6.90 (.271) 3 2 1 3.05 (.120) 2.54 (.100) 0.50 (.019) 5.55 (.218) 1.50 (.059) 7.96 (.313) MOM Ø5.00 (.196 DIA) 1.80 (.070) 4.20 (.165) 5.15 (.202) ON Ø4.60 (.181 DIA) 10.16 (.400) TP32WS83500 4.50 (.177) 3.80 (.149) 2.10 (.082) Function 2 (ON - MOM) 3 3.05 (.120) 3 2 1 5.55 (.