Datasheet

H-6 APEM www.apem.com
Sealing boots
For pushbutton switches
H
For bushing Ø 11,9-32 NS (15/32-32UNS) - 13000X778, 13000X768 and 8000-6X934 series
12.80
(.504)
AC.FLATS
17 (.669)
HEX NUT
Nickel plated
Matt black
PUSHBUTTON SILICONE BOOTS
Black
U589 U589-6 U589-3 U589-7
U590 U590-6 U590-3 -
Red Green White
For bushing Ø 12 x 0.75 SI (.472x.075 IS) - 1200, 4700 and 4800 series
17 (.669)
AC.FLATS
(.504)
12.80
HEX NUT
Nickel plated
Matt black
PUSHBUTTON SILICONE BOOTS
PUSHBUTTON BLACK NEOPRENE BOOTS
Black
U1654 U1654-6 U1654-3 U1654-7
U1656
Nickel plated
Matt black
U31
U225
Chrome plated
U224
U1656-6 U1656-3 -
Red Green White
For double sealing on IP and IB-IS series
(.748 DIA)
Ø19.00
(.377)
9.60
SILICONE BOOT
Transparent
Blue
U5125
U5125-1
Black
U5125-2
Red
U5125-6
Operating temperature : -40°C to +85°C
The flat seal or O-Ring supplied with the switch should not be used with this boot.
For long plunger (-9) care should be taken over the panel thickness.
For double sealing on IA series
(.826 DIA)
Ø21.00
(.267)
6.80
Ø16.00
(.629 DIA)
SILICONE BOOT
Black
U6602
Yellow
U6605
Red
U6606
For AV series (models with Ø 19 mm bushing)
Ø23.00
(.905 DIA)
4.10
(.161)
SILICONE BOOT
Black
U2187-2
Green
U2187-3
Grey
U2187-4
Yellow
U2187-5
Red
U2187-6
White
U2187-7
Transparent
U2187-8