User Guide

15
7. To know whether the camera do loop recording, Please transit all
files recorded by the camera to the computer and then check whether
the camera can loop by the record time of the files. The camera was
recording all the time, so if the time of the video are not continuous, it
means the camera can loop, it do cover the unlocked videos.
8. If the camera shows “Low Battery” and turns off while connecting
the car charger, firstly, please tell us whether the light of the dash cam
as well as the car charger is on or not when it’s charging. It can help
us find out the problem by knowing the details of the lights; secondly,
please check whether the connect ports as well as the cable of the car
charger are connected well or not; thirdly, please reset the dash cam
after you taking the SD card out, connect the dash cam to your
computer by the original USB cable that comes with the camera for
about 2hours, and them press the power button to see whether the
camera could be powered on. If the camera still cannot be charged
successfully, please do not hesitate to email us for help, we will sure
here provide you a satisfied solution based on your demand.
Any advice would be appreciated!
APEMAN official email: [e-mail]