Installation Guide

Jumpers DesCription

J400

ANTENNA

Select external antenna by connecting the two right pins.

Select internal antenna by connecting the two left pins.

J200

PAIR

Select pairing mode by connecting the two right pins.

Note: If the pairing jumper if removed within 10 seconds

from from boot up and the Hub LED is lit, all paired devices

will be unpaired.

AH40 - Jumpers

Note: To install an external antenna use a thin screwdriver and

gently bend the antenna cap loose. Be careful, there are sensitive

components behind the cap!

PAIR

J700

8-24V

- +

J800

EXT

J200

J400

INT

S100