User's Manual

CHAPTER 8. MANAGEMENT INTERFACES
8–18070-20000340-01 Rev A
Configuration Pages
The Web GUI lets you check, and in some cases alter, the configuration of the
subscriber equipment. There are four configuration pages which may be displayed, as
indicated by the submenu at the left of the page; they are illustrated in Figure8-20
through Figure8-23.
NOTE: NAT configuration applies only to PacketWave 120 and 130 models.
System Configuration
As shown in Figure8-20, the system configuration page provides an overview of the
subscriber’s wireless network connection and operating parameters. These parameters
are read-only.
Figure8-20 Subscriber System Configuration Page