User's Manual

CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
6–16070-20000340-01 Rev A
Figure6-6 WSS — Multiple Subnets Menu
Table6-F BSU — WSS — Multiple Subnet Parameters
Parameter Range
(and Default)
Comments
Total Configured Subnets Read-only field; increments each time a new subnet
is added using the new instance icon.
Subnet ID Read-only field indicating subnet being configured.
WSS IP Address xxx.xxx.xxx.xxx
(no default)
Enter the IP address for the WSS subnet. Typically
this will follow the standard gateway address con-
vention for subnets.
Required field (one instance).
WSS Subnet Mask xxx.xxx.xxx.xxx
(no default)
Enter the subnet mask which defines the subnet
address range.
Required field (one instance).