User's Manual

6–17070-20000340-01 Rev A
CHAPTER 6. BSU AND S UBSCRIBER CONFIGURATION
Configuring the Main Base Station Parameters
Click on the MAIN tab in the upper row. As the second row of tabs shows, there are
three menus for configuring the main base station parameters:
• General — Used for cell, IP, and SNTP (time) configuration, and for specify-
ing the active wireless subsystems (WSS).
• Server IP — Used for specifying the IP addresses of the various servers
accessed by the Base Station.
• Bridging/Clustering — Used to create multi-sector clusters, and to enable or
disable bridging between subscribers in the same sector or cluster.
General Parameters
Click on the General tab so that the screen illustrated in Figure6-7 is displayed.
Specify parameters as indicated in Table6-G.
Figure6-7 MAIN — General Menu