User's Manual

1–7
070-20000750-01 Rev A
Chapter 1. Overview
Figure 1-5 Location of Grounding Lug on Outdoor Unit (Radio/Antenna)
Indoor Unit Installation
Installation of the Indoor Unit involves placing the unit in the desired location, connecting
radio/antenna and local Ethernet cables to the rear panel, and applying power.
WARNING: For proper cooling, the Indoor Unit must be installed in the upright posi-
tion, with adequate air flow around and through it.
To apply power to the Indoor Unit:
1. Plug the power cord into the Power connector on the Indoor Unit,.
2. Plug the power cord/transformer into a surge-protected AC outlet.
The Indoor Unit does not have an on/off switch; to turn the unit off, disconnect power at
the power outlet.
Lug installed here for ground connection