User's Manual

Chapter 3. Base Station Unit Web GUI
3–4
070-20000750-01 Rev A
The Web GUI Home Page
When you log on using the BSU’s IP address, you will be at the Home Page of the Base
Station Unit’s Web GUI as shown on Figure 3-3.
The Web GUI will log off after 15 minutes of inactivity. Activity can be either user input or
automatic status updates performed by the Web GUI (as in the connectivity views
described below). To keep the Web GUI from logging off when you will not be using it for
more than 15 minutes, go to a page on which status is automatically updated.
BSU/SU Connectivity
From the BSU Home Page, you can access graphical connectivity view of the BSU and SU
connection. Hyperlinks allow you to navigate through the connectivity view.
The connectivity view provides a quick way to identify the configured BSU/SU, and to
check their status. The arrows pointing to the Subscriber Unit in Figure 3-3 indicate wire-
less channel status: green if good or red the Subscriber Unit is down.
Figure 3-2 Basic Elements in BSU and SU Web GUI