User's Manual

Chapter 4. Subscriber Unit Web GUI
4–6
070-20000750-01 Rev A
Overview of SU Web GUI Functions
Table 4-A summarizes the functions available for each of the Main Menu and Submenu
selections.
Table 4-A Summary of the SU Web GUI
Main Menu Submenu Functions
Configuration System Shows general SU information and status. Read-only.
Administration Specifies contact, location, and system name.
Password * Specifies ISP or Subscriber password for Web GUI, CLI,
and FTP.
SNMP Configures SNMP management of SU.
Up/Downstream
Default Best Effort
Shows configuration of upstream or downstream default
best effort service flow (ID=0). Read-only.
Radio Shows allowed transmit power. Read-only.
IP Filter List of all defined IP filters for wireless or Ethernet port.
Hyperlinks to contents of individual filters. Read-only.
Utility Device Control * Several commands: Reset SU; Upload Configuration. (At
Subscriber level, only Upload Configuration is available.)
Fault Event logs List of logged SU events. Read-only.
E-mail Configuration of e-mail alert reporting.
Status SU System Status * SU software and hardware information, plus operational
status. Read-only.
SU Link Status Transmit and receive details for wireless link. Read-only.
Performance SU System Statistics Basic Transmit and Receive counts. Read-only.
SU Filter Statistics Counts of packets passed and blocked for wireless or
Ethernet port. Read-only.
SU Flow Statistics List of service flows supported by the SU; hyperlink to
service flow details. Read-only.
* Available when logged on at Subscriber level.