User's Manual

4–11
070-20000750-01 Rev A
Chapter 4. Subscriber Unit Web GUI
Radio Configuration
The Radio Configuration page, shown in Figure 4-10, shows the maximum transmit power
allowed in the selected frequency band.
This page is available only at the ISP logon level.
Figure 4-10 Radio Configuration Page
IP Filter Configuration
IP Filter Configuration pages show any IP filters configured for the Subscriber Unit’s wire-
less and Ethernet interfaces. IP Filter List pages list all filters configured for a particular
interface, as shown in Figure 4-11. Hyperlinks at the top of the page allow either the Ether-
net or the wireless interface filters to be listed.
Each filter listed has an identifier number which also functions as a hyperlink to an IP Filter
Contents page. The IP Filter Contents page identifies the Layer 2 or Layer 3 parameters
used in this particular filter.
All IP Filter Configuration parameters are read-only.