User's Manual

Appendix B. Event Reporting
B–2
070-20000750-01 Rev A
Table B-A Reported Events
Fault Event Description
Cold Start BSU, WSS, or subscriber Indoor Unit has performed a full hardware boot.
Warm Start BSU, WSS, or subscriber Indoor Unit has performed a software reboot.
Authentication Suc-
ceeded/Failure
User name or password login succeeded/failed
Port N Link Up/Down WSS port (number N) has gone up/down.
BSU Up/Down BSU has started/ceased normal operation.
SU Sync Acquired BSU has acquired wireless channel synchronization with a specific
Subscriber Unit.
SU Up/Down Subscriber Unit has started/ceased communication with the BSU.
DHCP Failed A failure has occurred in the retrieval of required data from the DHCP
server.
Power Supply Failed
Radio Synth not Locked Radio synthesizer out of locked; could be the result of bad connection to
the radio or bad radio.
Radio Synth not Locked
Cleared
Radio is back to locked
Fan Alarm Fan stops
Fan Alarm Cleared Fan back to operational
Temperature too Low/High
Temperature Normal
Current Image Corrupted Software stored on BSU is corrupted
SU Failed Registration SU failed to complete registration process with the BSU
Config File Error Configuration file has error