User's Manual

Appendix C. Diagnostic Manager
C–2
10004880 Rev. D1
2. Click on the Diagnostic Manager icon on the desktop to launch the utility. The win-
dow shown in Figure C-1 will be displayed.
3. Enter the MAC address of the PacketWave 200 as prompted; then click OK.
Figure C-1 Opening Diagnostic Manager Window
4. The Diagnostic Manager will open as shown in Figure C-2. The Diagnostic Manager
includes numerous diagnostic functions which can be initiated from the main
menu bar or from the command list area at the bottom of the window.
5. Execute diagnostic commands as directed by Aperto personnel. Command results
will be displayed in the text area below the menu bar.
WARNING: Diagnostic functions can seriously disrupt operation of the PacketWave
200. Use the Diagnostic Manager utility only under direct supervision by
Aperto personnel.
Make sure you close Diagnostic Manager (DM) sessions manually when using DM with
PacketWave 200 series products. If they are not closed, the data, which remains in the
memory will take up space needed by theSystem Upgrade Manager (SUM). SUM will give
a warning that there is not enough space and the process will not complete