User's Manual

Chapter 6. The Web GUI
6–6
10004880 Rev. D1
Table 6-A Summary of the SU Web GUI
Main Menu Submenu Functions
Configuration System Show general SU information and status; set customer name
and network access.
Administration Set contact, location, and cell name.
Password * Set password(s) for ISP and/or Subscriber access levels.
Ethernet Show/set configuration of subscriber Ethernet link.
SNMP Configure SNMP management of SU.
VLAN Show VLAN configuration. Read-only.
Wireless Show/set radio and antenna configuration.
Up/Downstream
Default Best Effort
Show configuration of upstream or downstream default best
effort service flow (ID=0). Read-only.
Routes * Allows SU routing table to be viewed and built.
NAT * Allows configuration of SU’s internal NAT routing.
DHCP * Allows configuration of SU’s internal DHCP server.
IP Filter List of all defined IP filters for wireless or Ethernet port.
Hyperlinks to contents of individual filters. Read-only.
PPPoE/PPP * Show/set PPPoE/PPP parameters.
Utility Device Control * Reset SU (ISP only); Upload Configuration.
Fault Event logs List of logged SU events.
E-mail Configure e-mail alert reporting.
Status SU System Status * SU software and hardware info, operational status.
Ethernet Status Subscriber Ethernet link status.
Radio Status SU radio information and status.
SU Link Status Transmit and receive details for wireless link.
PPPoE/PPP Status * Show/set PPP user name and password.
Performance SU System Statistics Basic Transmit and Receive counts. Read-only.
PPPoE Statistics Shoe PPPoE packet counts.
RF Signal Quality Wireless link performance counters. Read-only.
SU Filter Statistics Passed and blocked packets for wireless or Ethernet port.
SU Flow Statistics List of service flows supported by the SU; hyperlink to ser-
vice flow details.
Debug CPE Access to performance displays and debug commands.
* Available at Subscriber level.