User's Manual

6–7
10004880 Rev. D1
Chapter 6. The Web GUI
Configuration Pages
The Web GUI displays SU configuration in numerous individual pages, as indicated by the
Configuration Submenu. In addition, many configuration parameters can be changed via
the Configuration pages.
System Configuration
As shown in Figure 6-4, the system configuration page provides an overview of the
Subscriber Unit’s network and operating parameters. All parameters are read-only except:
• Network Access enables or disables connection to the wireless network.
• Customer Name is a text field identifying the subscriber.
Click on the Submit button to activate any changes made to these two parameters.
A change to the Customer Name field will take effect immediately, without a reboot.
An event will be logged indicating the change (see Figure 6-29). The customer name
will also be changed on the BSU’s SU Inventory page when it is changed at the SU.
This page is available only at the ISP logon level.
Administration Configuration
The Administration Configuration page, shown in Figure 6-5, allows SNMP name, contact,
and location information to be entered for the subscriber site. Any text entry is acceptable,
subject to length limitations for each field.
Click on the Submit button to activate any changes made on this page.
This page is available only at the ISP logon level.
Password Configuration
Passwords for the ISP and Subscriber logon levels are specified on the Password Config-
uration page, shown in Figure 6-6. Passwords which can be defined depend on the current
logon level; if logon is at the Subscriber level, only the Subscriber password fields will be
displayed. The passwords are used for the Web GUI, SNMP, CLI, and FTP.
The password must be entered exactly the same (including case) in the two password
fields to be accepted. After specifying the desired password, click Submit. The Web GUI
will prompt that password storage is temporary, and that the Upload Configuration func-
tion (page 6-30) is required for making the password permanent.