- Apex Generator User Manual

4-68 5708009-C
Advanced Energy
®
130
read
mainframe
software
version
number
Requests the version number of the
mainframe software. The returning packet
contains 5 ASCII characters—a 5-digit
number. This command is used in conjunction
with CMD 198 to obtain the version/revision
number of the mainframe software.
0 5 data byte
5 ASCII
characters
155
read control
method
Requests control mode (set by CMD 14).
Returning values: 2 = host, 4 = analog.
0 1 data byte
8-bit value
156
read active
target
Requests the number of the active target (set
by CMD 11).
0 1 data byte
8-bit value
157
read target
life
Requests the amount of life remaining (set by
CMD 12) in the active target you specify.
Two decimals are implied— 100 = 1 kWh.
1 4 data bytes
32-bit value
Table 4-11. Profibus Host Port Commands (Continued)
Command Description Number of
Transmit
Data Bytes
Number of
Response
Data Bytes