Operating instructions

• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2. Press the • buttonto highlightand select the "Option", and
press ENTER button.
3. Press ENTER button until the appropriate system is
selected.("On"or "Off")
4. Please press SETUP buttonto quit.
V_.T!]r_l_llvAvL:t,xo|i
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2. Press the • button to select the "Option", and press ENTER
button.
3. Press the • button to select the "Auto Power Off".
4. Press ENTER button, until the appropriate system is
selected.("Yes" or "No")
5. Press SETUP button to quit.
• Press VCR button to change into VCR mode
1. Press the SETUP button on the remote control.
2. Press the • button to select the "Option", and press
ENTER button.
3. Press the • button to select the "Output Channel".
4. Press ENTER button, until the appropriate system is
selected. ( "CH3" or "CH4" )
5. Press SETUP button to quit.
Important notes regarding this function
t.AUTO REPEAT will replay a tape after it ends. The machine
will rewindthe tape and replay the material automatically.
2.AUTO REPEAT can be turned off by either powering off or
throughthe SETUP menu.
3.Buttons,such as PLAY/PAUSE, STOP, FF, REW, EJECT will
be disable while inAUTO REPEAT mode. You will stillhave the
optionto switchbetween DVD and VCR function,however it will
not reset the AUTO REPEAT function of the VCR.
How to set up this function
1 Press the SETUP buttonon the remote controlto activate the
main menu, while in play.
2 Press the • button to highlight "Option". Press the ENTER
button to access the OPTION menu.
3 Press the • button to highlight "Auto Repeat". Press the
ENTER buttonto toggle between "On"and "Off".
4 Press SETUP buttonto quit.
• Press VCR button to change into VCR mode
1 Press the SETUP button on the remote control.
2. Press the • button to select the "Option", and press ENTER
button.
3. Press the • button to select the "Tape Select".
4. Press ENTER button, until the appropriate system is
selected.
5. Please press SETUP button to quit.
1. Do not use any tape below. Damage of video head or
cut/coiling of tape may cause failure.
-Tape with mold
-Tape stained with juice or attachments
-Tape having breakage connection
-Disassembled tape
2. Moisture condensation may occur in tape. Moisture
condensation damages the tape. Please use the tape after the
moisture condensation is disappeared.
3. After use, store tape vertically in a case to prevent loose.
4. Do not store in the following places.
-High temperature and humidity
-subject generation of mold
-Subject to direct sunlight
-Much dirt or dust
-Near strong magnetic materials such as speaker
A D V - 3 8 0 0 A P E X D I G I T A L 13