Service manual

APEX — Installation and Service Manual 115
LEDs
*Older version of this board (671-6538-sax) has incorrect silk screening on solder side. Silk screening on part side is
correct.
Table 10. CL-34000 License Board
Table 11. MX-34000 Matrix Board
Off Board is not running
ALARM DS6 Red Bad power supply
Off No power problems
Ref Display Meaning
ALRM DS3 Red Bad power
Off No power problems
BUSY DS2 Amber Configuration in progress
Off Waiting
DONE DS1 Green All boards configured
Off All boards not configured
Ref Display Meaning
CTRL A DS1 Green Control board A present and link OK
Off Bad link or board not present
CTRL B DS2 Green Control board B present and link OK
Off Bad link or board not present
MATRIX DS 3 Green Not used
Off N/A
LINK OK
OUTPUTS 1-8 DS4-11 Green Board present and link OK
Off Bad link or board not present
INPUTS 1-8 DS12-19 Green Board present and link OK
Off Bad link or board not present
EXP LINK Expansion link is receiving data from other chassis
MS DS20 Green
Highest numbered link (4) OK
(MS = most significant)