LE2412 USER’S MANUAL 24 24” LED TELEVISION
Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Safety: TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED PERSONNEL ONLY. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Bass / Treble / Balance ......................................................................................... 21 Table of Contents ................................................................................................. 4 Surround .............................................................................................................. 21 Introduction / What’s In the Box ........................................................................... 5 Audio Language ........................
Introduction LE2412 quality televisions available today that removes blur from fast action scenes in movies and sports. View HDTV and digital broadcasts over-the-air when connected to an antenna. Choose an outdoor antenna for the best possible reception. Visit www. antennaweb.org. Multimedia Interface (HDMI) interconnects offer the purest audio and video digital tion blu-ray player or gaming console). Other video inputs includes an HD component, composite, and VGA terminal for connection to a computer.
Remote Control Your remote control handset is powered by two (2) AAA type batteries • Place two (2) AAA batteries into the compartment with correct polarity. • When pointed towards the television, the effective range is approximately 12 feet from the front of the IR receiver, 30° to the left and right, 20° up and down. • To avoid damage from possible battery chemical leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time.
Remote Control Functions can be controlled using the remote control handset 1. Power – Turn the LCD display ON or OFF (Standby). 2. Display – Provides program information currently viewed. 3. Audio – Select Dynamic, Standard, Movie or User sound modes. (pg. 19 21) 4. MTS – Press to select a program’s second audio channel (if available). (pg. 27) 19 5. CCD – Select closed caption subtitles (if available) OFF > ON. (pg.22 23) 6. Guide – Press to review scheduled programming for the current channel viewed.
1. Input - After connecting your DVD, cable box, etc., select the appropriate input source to view. Press the INPUT button to display input options. Press CH+ / CH- buttons to highlight an input. Press I VOL+ to select. INPUT SOURCE SOURCE INPUT TV AV Component HDMI 1 HDMI 2 VGA A soft blue light illuminates when television is powered ON TV Over view Side Panel IR Receiver 3 4 5 3. Channel (CH+ / CH-) - Press the CH+ / CH- buttons to select a channel in TV mode. 4.
TV Over view TV REAR PANEL 4 Rear Panel & Pedestal Removal SERVICE 9 PC IN COMPONENT YPbPr AV 2. SERVICE Port - For service technician use only.
Installation Connection to Power Cord & Antenna Cable/Satellite Box COMPONENT YPbPr PC IN SERVICE COMPONENT YPbPr PC IN SERVICE 10
Installation Connection to HDMI Inputs 11 AV SERVICE HDMI2 AV HDMI2 SERVICE PC IN PC IN COMPONENT YPbPr COMPONENT YPbPr INPUT SOURCE SOURCE INPUT TV AV Component HDMI 1 HDMI 2 VGA
SERVICE PC IN COMPONENT YPbPr For BETTER video performance AV HDMI2 Optional Component cables Connect to external equipment that features component video output jacks for great performance. Use Component YPbPr component video and audio inputs with a set top box, gaming console or DVD player.
Installation Connecting External Equipment to AV Composite IN on your television TV SIDE PANEL AV HDMI2 Optional cables For GOOD video performance Connection to a Composite Input Connect to external equipment using optional video and audio cables. Composite output jacks are available on most set top boxes and DVD players. (Component and HDMI connections are recommended for best performance, if possible).
SERVICE PC IN TV REAR PANEL COMPONENT YPbPr Installation Connecting a Personal Computer with VGA to your television Optional cables Recommended computer display resolution:1,920 x 1,080 @ 60 HZ How to Connect Audio sound • Connect an optional 3.5mm audio cable from the computer’s mini audio output jack to the audio input on the TV’s rear panel. How to Use • Press the INPUT button on the remote control. Use arrow buttons to highlight the input to view (VGA) then press ENTER.
Installation Connection to a Home Theater Audio System TV REAR PANEL TV REAR PANEL SERVICE AV PC IN COMPONENT YPbPr HDMI2 Optional digital cable optional cables For BEST audio performance Connection to a Home Theater System Connecting to a Home Theater System Dolby Digital can deliver optimal 2 channel stereo or 5.1 surround ra subwoofer.
TV Setup Initial Setup Wizard Select Language Time Zone Set Wizard Initial Setup Wizard 16 16
TV Setup Initial Setup Wizard 17 Set Wizard INPUT SOURCE SOURCE INPUT TV AV Component HDMI 1 HDMI 2 VGA
Channel Scan E rr or Cable Service TV Setup Initial Setup Wizard LE2412 To receive the Channel Access Code: Go to Web: www.tmaxdigital.com/activation Text your 18-digit S/N to: 1-909-939-2336 Call: 1-877-833-1888 E rr LE2412 How to Navigate: • Press the arrow button to highlight the item you want. Initial Setup Wizard or Antenna ATSC NOTE: 1. TV reception when using an indoor/outdoor antenna is dependent on local terrain, tall buildings and distance from local area TV transmission towers.
TV Setup Select antenna options and perform Channel Auto Scan to receive television channels that will be stored into the TV tuner memory. To • • • enter TV Mode: Press the MENU button Using the arrow buttons; scroll to highlight TV mode Press the down arrow button to highlight CABLE or AIR Cable Mode Select CABLE if you subscribe to a pay television service without a set top box. TV Channel Setup & Channel Auto Scan • Using the arrow button to highlight CABLE.
- How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select PICTURE. Press the down arrow button to highlight PICTURE MODE, then press the arrow button to select your viewing preference from 4 factory options: STANDARD > DYNAMIC > MOVIE >POWER SAVING * > PERSONAL . The STANDARD setting is recommended for most viewing environments. er options more pleasing.
Menu Adjustments Audio Settings The AUDIO menu offers options to make sound enhancements while listening through the built-in speakers or to select digital audio options when connected to a Dolby Digital receiver though a (SPDIF) coaxial digital output. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select AUDIO.
How to Navigate: Press the MENU button on the remote control. Navigate using arrow t u buttons to select TIME. • Press down q arrow button to highlight Sleep Timer. Then press the u arrow button to select time to view before television timer turns off: 5 Min > 10 Min > 15 Min > 30 Min > 45 Min > 60 Min > 90 Min > 120 Min > 180 Min > 240 Min > OFF. • Press down q arrow button to highlight Time Zone. Then press the u arrow button to select between: EASTERN > CENTRAL > MOUNTAIN > PACIFIC > ALASKA > HAWAII.
Menu Adjustments Setup Settings In the SETUP menu you may change the initial set up of preferences that include settings for language, menu display, computer monitoring, closed captions, enhancement of black detail in the picture and resetting your TV back to its factory default status. How to Navigate: Press the MENU button on the remote control. Navigate using arrow t u buttons to select SETUP.
How to Navigate: Press the MENU button on the remote control. Navigate using arrow t u buttons to select SETUP. Press the down q arrow button to highlight Closed Caption. • Press down q arrow button to highlight Advanced Selection. Navigate using the t u arrow buttons to select Service 1-6. • Press down q arrow button to highlight Option. Press the u arrow button to enter a menu with options to customize text fonts, colors and opacities. • Press down q arrow button to highlight Basic Selection.
PC Menu Adjustments Advanced Settings 25 In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC. Recommended resolution is 1,366 x 768. For use with a laptop computer, refer to your computer’s owner manual on instruction for proper display output. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional 3.5mm audio cable for stereo sound. See page 14 for details.
How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select PARENTAL. Gain access to parental rating options by pressing the down arrow button to highlight ENTER PASSWORD. Enter your 4 digit code (factory default code is “0000”) unless previously changed. • To set parental controls for television programming or DVD movies, press the down/up arrow buttons to highlight US. Navigate using the buttons to highlight TV/MPAA menu. again.
Menu Adjustments Parental Control - Canada 27 In the PARENTAL menu, you may block television and movie programming based on Canadian TV and movie rating guidelines. To gain access and select your preferences within the Parental menu make certain your input is set to TV. How to Navigate: Press the MENU button on the remote control. Navigate using arrow buttons to select PARENTAL. Gain access to rating options by pressing the down arrow button to highlight ENTER PASSWORD.
How to Navigate: Press the MENU button on the remote control. Navigate using arrow t u buttons to select TV. Press the down q button to highlight your preferences. • Highlight FAVORITE to add channels to your Favorites List. Navigate using the t u qp arrow buttons to select channels to be added or deleted from your list. Press ENTER to add or delete a channel. A checkmark indicates a channel has been added. You may also display your FAVORITE list from the remote control by pressing FAV.
Zoom Modes The ZOOM function offers several viewing display options on the 16:9 screen. Press ZOOM to cycle through the following widescreen settings. Press ZOOM to cycle through the following widescreen settings. 1. NORMAL Recommended for viewing native widescreen content and undistorted 4:3 images. 2. WIDE Stretches certain 4:3 content and may reduce the black bars. 3. ZOOM screen when viewing widescreen content. The zoom effect will crop images somewhat. 4.
Display LED Size (inch) 23.6” Diagonal Aspect Ratio 16:9 Digital Compatibility 480i / 480p / 720p / 1080i / 1080p Resolution 1,920 x 1,080 Brightness (cd/m2) 300 Dynamic Contrast Ratio 30,000:1 Vertical Viewing Angle (degrees) 160° Horizontal Viewing Angle (degrees) 170° Maximum Colors (millions) 16.7M Power Consumption < 100 Watts Audio Power 2 X 3W Dimension without Pedestal Installed 22.56” (W) x 14.3” (H) x 1.7” (D) Weight without Pedestal 9.25 lbs.
Troubleshooting 18 18 23 23 31 26 27 28
AC Power Plug Add/Delete channels Advanced mode Advanced selection Air/Cable Antenna installation Arrow buttons Audio Setup & Adj.
War ranty Limited North American Warranty Tmax Digital Inc. LE2412 For peace of mind and valuable services, please take a moment to register your product at www.tmaxdigital.com Tmax Digital Inc. expresses the following non-transferable and limited warranty on a new Apex Digital LE2412 purchased from an authorized Apex Digital® U.S. retailer. Retain the original bill of sale for proof of purchase.