Specifications

1.800.338.7337 / www.soundoffsignal.com
9
Amber Lens 54” Pinnacle Lightbar mounted to
the headache bracket on a Ford truck.
Photo caption
caption
Back of truck shown. Predator 2 Dual Dash/Deck/
Grille & Dual Stacked Surface Mounts also shown.
Pinnacle™ LED Full Size Lightbar
Optional Opticom™ Preemption Module available for
municipalities using the Opticom™ Infrared System.
New Headache Rack Bracket is designed for secure
installation on truck headache racks.
• Innovative optics design, “Fusion Technology”,
the fi rst optics designed like a lighthouse to boost the light
farther & wider for a brighter, safer warning signal
•
DSC Technology (Digital Serial Communication)
provides 24 separate control lines (inputs) to connect to your
switching devices - this 15’ thin digital cable reduces installation
time & expense
•
Streamlined, modular design is easy to maintain with
fi eld replaceable modules that are easily upgradable
• Powerful LED Alley & Take Down Modules standard
• 2 LED Alley Light options: Standard lens or 15° Forward
Facing optics - Standard Lens casts a direct fl ood of light from
the lightbar while the 15° Forward Facing casts the light slightly
forward for increased driver side visibility
• 3 mounting options: innovative Adjustable Mount,
Headache Rack or Low Profi le Fixed Mount Brackets, see page
15 for more information
•
Optional Preemption Infrared Module available
for use with the Opticom™ Infrared System that increases inter-
section safety & reduces response times for fi rst responders
•
Split Arrow option illuminates every other diode in each
inboard module along the length of the bar
•
2 Rear Arrow Control options:
4 Wire option with built-in Arrow Controller that works with any
standard left, right or center out warning switch (DAS compat-
ible, see pg. 61)
The 8 Wire option allows 8 arrow inputs which are compatible
with other manufacturer’s directional arrow controllers
•
Operating Modes: 1) Cruise Mode - turns on selected
lights in low power mode. 2) Mode 1 - set to any pattern (stan-
dard mode). 3) Mode 2 - set to any pattern (activated by the
mode wire on the Breakout Box) also referred to as “rolling code”.
4) Low Power Mode - works in combination with Mode 1
or Mode 2 with arrow/turn/brake functions to reduce the
brightness of the lightbar
•
Clear or Color Lenses in Amber, Blue or Red
• 6 Lengths available: 36” (91 cm), 42” (107 cm),
48” (122 cm), 54” (137 cm), 60” (152 cm) & 72” (183 cm)
Available with
optional Opticom™
Preemption Module
NEW!
Tech Specs on pages 17 - 18 / Bracket information on page 15