Specifications

1.800.338.7337 / www.soundoffsignal.com
27
Tech Specs UnderCover™ Strobe Insert
Flash Patterns:
Power Supply dependant
(see Strobe Power Supplies)
Anode Voltage
Range:
225 - 500 Volts
Maximum Energy:
20 Joules
Maximum Power:
35 watts
Trigger Energy:
4.4mJ typical @ 200 Volts
Current Draw:
Power Supply dependant
Dimensions:
Height x Diameter
Screw-In Style
1.7” (43 mm) H x 1.6” (41 mm) Flange Diam.
Push-In Style
1.6” (41 mm) H x 1.3” (33 mm) Flange Diam.
Operating Temp.:
-20° to +65° C / -68° to +149° F
• Traditional Strobe Head Inserts powered by a 35
watt dual Helix Strobe Tube
•
Manufactured with precise wire alignment for
superior performance - wires are centrally aligned unlike many
competitors strobe tubes
•
Available in 2 mounting styles - Screw-in with a
fl ange base or Push-in style with grommet base
•
Screw-in style has a fl ange base that is attached to
the vehicle by using supplied screws
•
Push-in style has a grommet base and is installed
by simply pushing the base through a pre-drilled hole
•
Inserts include 5.5” wire length with attached connector
& mounting screws for installation
TM
Crafted with precision - wire alignment keeps wires
centrally aligned for optimal performance & durability.
Reverse light installation shown on a Ford Crown Victoria.
Headlight installation shown on a Ford Crown Victoria.
Push-In Strobe Insert (each)
Black Base/Amber Tube: #ETUPØA-P
Black Base/Clear Tube (White): #ETUPØC-P
Push-In Strobe Insert - 15’ Cable with
AMP Connector (each)
Black Base/Clear Tube (White): #EUPNSNDC
H
ea
d
In
se
rt
s
p
ow
er
ed
b
y
a
35
h)
:
#ETUPØA-
P
:
#ETU
PØ
C-
P
Ca
ble wi
th
)
: #EUPNSNDC
Screw-In Strobe Inserts (each)
Black Base/Amber Tube: #ETUC ØA-P
Black Base/Blue Tube: #ETUC ØB-P
Black Base/Blue Tube: #ETUC ØG-P
Black Base/Red Tube: #ETUC ØR-P
Black Base/Clear Tube (White): #ETUCØC-P
Push-in Style
Screw-in Style