Specifications

1.800.338.7337 / www.soundoffsignal.com
3333
1.800.338.7337 / www.soundoffsignal.com
Tech Specs GHOST™
Flash Patterns:
33 Flash Patterns
Light Sync:
Yes
Technology:
6 Gen3 LEDs
Mounting:
Surface Mount on 4.9” (124 mm) centers
Input Voltage:
10 - 30 Vdc
Current Draw:
0.75 amps (fl ash pattern dependent)
Dimensions:
Width x Height x Depth
5.7” (14 cm) L x 1.06” (28 mm) H x 1.8” (46 mm) D
Operating Temp.:
-40° to +65° C / -104° to +149° F
Powerful, high bin LEDs for consistent color & maximum
brightness offers a long-lasting, low maintenance light.
Close up photo of a Black housing GHOST™ light
shown mounted on the side of a wrecker/tow truck.
Perfect mid-level lighting for increased visibility &
heightened safety (Skyfi re™ LED Lightbar also shown).
Excellent Stop/Tail rear lighting option for larger
vehicles with power & brightness for a maximum signal.
• The original GHOST light now in a sleek, narrow
surface mount light - now available in a Dual
Stacked light
• Die cast aluminum housing in your choice of Black,
White or Chrome
• Available in 15 solid or split colors
• Premium optics offer the most power & brightness
increasing safety for emergency workers & civilians alike
•
6 powerful Gen3 LEDs offer maximum brightness, color
consistency & reliability
•
Red Stop/Tail model is a low power, Steady-on Red
Running Light
. Once brake is applied light fl ashes 5 times &
remains on at full power while brake is activated
•
Moisture & vibration resistant for heavy duty &
exterior applications
•
Light Sync Technology to synchronize your lights to
alternate the fl ash patterns or fl ash simultaneously
•
Includes Santoprene Rubber Mounting Gasket
& Mounting Hardware
with 18” of 3-wire Shielded Cable
GHOST™ Single Surface Mount (SSM)
• Single light in Black, Chrome or White housing colors
GHOST™ Dual Surface Mount (DSM)
• NEW! Coming Soon
• Dual Stacked light in Black, Chrome or White housing colors