Specifications
1.800.338.7337 / www.soundoffsignal.com
64
64
Flashers - Headlight & Taillight
• Ideal fl asher for most “big 3” car models - designed for 2 to 4 headlight positive side switched headlight systems
• Great for motorcycles with positive side switched headlight systems
• Select-a-Pattern Technology w/ 7 user selectable fl ash patterns: PowerPulse™, RoadRunner™, ETM, Cycle Flash,
Q-Switch, Single Flash or Double Flash Alternating
• Built-in shutdown features include protection against: short circuit, over current, over voltage, under voltage, over
temperature & reverse polarity
• Durable & non-corrosive ABS plastic housing
• 100% Solid State, potted design for long-lasting, reliable performance
18” wire leads ...................................................................#ETHFSS-SP
Weather Seal Connector ..............................................#ETHFSS-SPWS
18” wire leads, Single Pattern ....................................#ETHFSS-CHP
AMP Connector ...............................................................#ETHFSS-SPA
Heavy Duty model (14 amp) ........................................#ETHDSS-SP
Amp Connector & Harness (14 amp) .......................#ETHFSS-SPFL
Heavy Duty w/ AMP Connector (14 amp) .............#ETHDSS-SPA
Heavy Duty w/ AMP Connector & Harness (14 amp)
.....#ETHDSS-SPFL
DRL compatible model (12v) .......................................#ETHFSS-SP-CMP
Isolation model (12v) ......................................................#ETHFSS-SP-ISO
Headlight Flasher, Solid State
• Operates a 2 or 4 headlight system on positive or ground side switched
vehicles
• 3 user selectable Flash Patterns: RoadRunner™, PowerPulse™ & Double
• When used at night, the low beam headlights remain ON for proper
illumination while the high beams fl ash
• Built-in high beam override interrupts the fl asher sequence to allow normal
high beam function & fl asher automatically resumes when the dimmer
switch is activated
#ETHFØØ-SP
Headlight Flasher, Relay
3.2“ (81 mm) L x 2.2” (56 mm) H x 2.8” (71 mm) W
Mounts on 1.4” (36 mm) centers
16” (41 cm) wires
3.2“ (8 cm) L x 2.8” (71 mm) W x 2.2” (56 mm) D
Mounts on 1.4” (36 mm) centers
16” (41 cm) wires
with Amp Connector & Fleet Mating Harness:
RoadRunner fl ash pattern #ETRRFLEE,
Q-Switch fl ash pattern #ETQSFLEE
Headlight Flasher, Relay #ETRRØØ-P
• Installs into 2 or 4 headlight positive side switched systems
• When used at night, the low beam headlights remain ON for proper
illumination while the high beams fl ash
• Built-in high beam override interrupts the fl asher sequence to allow normal
high beam function & fl asher automatically resumes when the dimmer
switch is activated
4.7“ (12 cm) L x 2” (51 mm) H x 0.7” (18 mm) D
Mounts on 4” (10 cm) centers
18” (46 cm) wires
Flash Pattern Descriptions see bottom of opposite page