Instruction manual

Revision 6.0 APEX LITE SERIES DVR
41
1.1 MOTION GRIDS
By default, all the motion grids are activated for all cameras and
the sensitivity level is 7.
To modify the setting, select the camera then adjust the sensitivity
level. To activate/deactivate motion grids, select Customize..
Use the combination of the enter button and the directional buttons
to activate or de-activate the grids.
Clear: detection OFF
Colored: detection ON
2. ALARM SOURCE
In case utilizing Alarm Inputs for alarm recording,
configure the appropriate circuit type, N/O or N/C.
Additionally, PTZ event preset may be configured.
When an event such as alarm trigger, motion, or
video loss occurs, APEX DVR sends preset
command to PTZ camera.
See the action policy below for the sample screen.
SOURCE OF THE EVENT ACTION OF THE PTZ CAMERA ON CHANNEL1
SENSOR 1 PRESET 2
SENSOR 2 PRESET 5
MOTION PRESET 8
POS TEXT PRESET 9
VIDEO LOSS ON CH 3 PRESET 7