User guide

17
APEX VIEWPOINT SYSTEM
Connecting the User Pod to the Core
User Port 1
User Port 16
Core
.....
.....
.....
User Pod
123 4567 8
12
34
CONNECTING THE USER POD TO THE CORE
To connect the Cat5 cables to
the core:
1
Locate the output cards (slots 7
and 8).
2 Connect the other end of the
video Cat5 cable to one of the
user ports with a monitor
symbol.
3 Connect the other end of the data
Cat5 cable to the port with the
data symbol in the same user
port number.
4 Route and bundle cables to
facilitate removal of the input
and output cards.
5 Repeat steps for all user pods.
To connect the Cat5 cables to
the user pod:
1
Locate the RJ45 jacks on the
back panel.
2 Connect one end of the video
Cat5 cable to the RJ45 jack with
a monitor symbol.
3 Connect one end of the data Cat5
cable to the RJ45 jack with a
data symbol.
4 Repeat steps for all user pods.