User guide

19
APEX VIEWPOINT SYSTEM
Connecting the System Pod to the Core
Core
System Port 32
System Port 1
.....
.....
.....
A
Port A
123 4567 8
System Pod
12
34
CONNECTING THE SYSTEM POD TO THE CORE
To connect the Cat5 cables to
the system pod:
1
On the back panel of the system
pod locate the RJ45 jacks in the
same port label where you
connected the monitor, keyboard,
and mouse cables earlier.
2 Connect one end of the video
Cat5 cable to the RJ45 jack with
a monitor symbol.
3 Connect one end of the data Cat5
cable to the RJ45 jack with a
data symbol.
4 Repeat steps for additional
system pods.
To connect the Cat5 cables to
the core:
1
At the back of the core locate the
input cards (slots 1–4).
2 Connect the other end of the
video Cat5 cable to the RJ45
jack with the monitor symbol in
one of the system ports.
4 Connect the other end of the data
Cat5 cable to the RJ45 jack with
the data symbol in the same port
number.
5 Route and bundle cables to
facilitate removal of the input
and output cards.
6 Repeat steps for additional
system pods.