User guide

20
2 Installation and Setup
CONNECTING THE ADMINISTRATION TERMINAL
Connecting the Administration Terminal
Administrator
Terminal Port
Core
Administration Terminal
To connect the administration
terminal:
1
On the master card at the back of
the core, connect the female end
of the DB9 null modem cable to
the administrator terminal port.
2 Connect the other end of the null
modem cable to the serial port
on the back of your terminal.
3 Set terminal settings to read the
ViewPoint software:
Baud rate 19200
Data bits 8N1
Parity none
Flow control none
Emulation 132 column
VT100 mode