User guide

3 Operation Guide
28
To switch any user to a selected computer:
1
From the Commands menu in the Advanced
Menus
screen, (Switch is highlighted by
default) press the number key that corresponds
to the port number of the computer to which
you wish to switch; the Switch Console to
Computer
screen appears with the computer
port highlighted.
■ Note
If you press the wrong number (Computer is
highlighted by default), enter the number of the
desired computer.
2 Move the highlight down to Console and use
the + or – keys to scroll through the available
consoles until the desired user console number
is displayed.
3 Highlight Mode and use the + or – keys to
select the connection mode from either
Full, which gives keyboard and mouse control
of the selected computer,
—or—
Watch, which displays the video of the selected
computer but provides no keyboard or mouse
control,
—or—
Open, which disconnects a user console.
4 Press ENTER.
OSCAR ADVANCED MENUS
COMMANDS
Switch
Scan
Query
Message
Version
Reset
SETUP
SWITCH CONSOLE TO COMPTR
Computer X
Console X
Mode OPEN
Switching any User to a Selected Computer