User guide

3 Operation Guide
30
DISCONNECTING ANY USER
To disconnect the currently selected
computer:
l From the Commands menu in the Advanced
Menus
screen (Switch is highlighted by
default), press ENTER.
To disconnect any user:
1
From the Commands menu in the Advanced
Menus
screen (Switch is highlighted by
default), press the number key that corresponds
to the port number of the computer to which
you wish to disconnect; the Switch Console to
Computer
screen appears with the computer
port highlighted.
■ Note
If you press the wrong number (Computer is
highlighted by default), enter the number of the
desired computer.
2 Move the highlight down to Console and use
the + or – keys to scroll through the available
user consoles until the desired user console
number is displayed.
To determine which user console is currently
connected to the computer, see Querying Pod
Status in this chapter.
3 Highlight Mode and use the + or – keys to
select Open, which disconnects a user console.
4 Press ENTER.
OSCAR ADVANCED MENUS
COMMANDS
Switch
Scan
Query
Message
Version
Reset
SETUP
SWITCH CONSOLE TO COMPTR
Computer X
Console X
Mode OPEN
Disconnecting Any User