User guide

3 Operation Guide
36
ESTABLISHING SECURITY
Advanced computer applications should usually be
protected against unauthorized users. ViewPoint’s
security features enable you to lock the keyboard
and monitor, requiring you to type a password
before resuming operation. You can also set a time
delay before the system is locked.
You must always provide a password to access the
fields in the Security Configuration screen. After
you type the correct password, the other fields on
the screen are activated. The table, Effects of
Settings on Security Configuration, describes the
menu attributes.
To lock the screen and keyboard:
1
In the Advanced Menus screen, press the
RIGHT ARROW key to highlight the Setup menu.
2 Use the DOWN ARROW key to move the high-
light to Security, and press ENTER; the Security
Configuration
screen appears.
3 Type your password and press RETURN.
Passwords can be up to 8 characters (case
sensitive). You must enter the new password
twice for confirmation.
■ Note
The factory default password is OSCAR. Because the
CAPS LOCK is disabled in OSCAR, you must hold
down the SHIFT key as you type each letter.
4 Highlight Time Delay and use the + or – keys to
obtain the desired value in minutes.
5 If you want to immediately activate the security
screen, highlight Test and press ENTER.
6 Press ENTER to save settings.
OSCAR ADVANCED MENUS
COMMANDS SETUP
Scan
OSCAR
Flag
Security
SECURITY CONFIGURATION
Password ******
New password ******
Repeat new ******
Time delay OFF
Mode SCREEN
Test
Establishing Security