User guide

4 Administration Tools
50
OPTIMIZING VIDEO QUALITY FOR THE SYSTEM POD
If your cable lengths are more than 25 feet, you can
optimize the video quality for the system pod.
Interconnecting system cables of less than 25 feet
require no compensation adjustments. The cable
length entry will maximize video performance in
most cases.
If you cannot obtain satisfactory video by entering
the cable length, contact Apex PC Technical
Support, because changing the settings values can
greatly affect other adjustments. The technician will
step you through the video compensation settings.
When instructed, use the + or – keys to obtain the
desired value or type in the number. The table,
Video Compensation Settings for the System Pod,
describes the available menu attributes.
To optimize video quality for system pods:
1
At the prompt “>” in the Display Matrix screen
type DS and press ENTER to access the Display
Systems
screen.
2 Press the RIGHT ARROW to move the highlight
to cable length. Then with the DOWN ARROW,
move the highlight to the desired computer.
3 Use the + or – keys to select the length of cable
from the core to the system pod or type in the
number.
4 Press ENTER to save your changes.
5 Repeat the steps for additional system pods.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Designate computer pod
Cable
Computer Device Name Length DAC 0 DAC 1 DAC 2 DAC 3
1 Default Computer 1 XXX 255 255 255 255
2 Default Computer 2 XXX 255 255 255 255
3 Default Computer 3 XXX 255 255 255 255
4 Default Computer 4 XXX 255 255 255 255
Optimizing Video Quality for the System Pod