Owner`s manual

3-30

The POWER button on the 9-button keypad is also

used as the “ENTER” key when entering security

codes. When a numeric button sequence is pressed,

the POWER button functions as the “ENTER” key for

a period of 3 seconds. After entering the numeric code

sequence, the POWER button must be pressed within

3 seconds to set the code. If the POWER button is not

pressed within 3 seconds, the new code will be

ignored and the POWER button will only function to

power the system on or off.

Setting Codes

Security codes must be four characters in length. The

boat owner initially programs the code by entering the

master code. Entering the existing user code or the

master code can reprogram the user code.

The user code is reprogrammed as follows:

1. Enter the existing master or user code twice and

press the POWER button.

2. Enter the new four-digit user code twice and press

the POWER button.

SKE-0035-A

POWER

1 2

3 4

5 6

7 8

9 0

LIGHTS

CTSY

FUEL

PORT

STBD

NAV ANC

Table of Contents